Provider box · Vodafone UK

Vodafone UK hub login, restart, Wi-Fi and guest network

Vodafone UK supplies the Power Hub, Ultra Hub and WiFi Hub with fixed broadband, and the 5G Hub with 5G Broadband. You manage them in the Vodafone Broadband portal in a browser, or for everyday Wi-Fi tasks in the My Vodafone app.

Sign in
192.168.1.1 or 192.168.0.1
App
My Vodafone (iOS and Android)
Password
The default password is on the label on the back or base of your hub. A 5G Hub’s label also gives a Web UI name and password; you can sign in with those or with the user account you made at setup.
Models
Power Hub, Ultra Hub, Ultra Hub 7, Ultra Hub 7+, WiFi Hub, 5G Hub, 5G Outdoor Hub

Checked 10 November 2026. Paths are from Vodafone UK’s help pages and Power Hub device guides. Portal steps were written for the Power Hub; Vodafone’s pages group the Ultra Hub, Ultra Hub 7+ and WiFi Hub with it for sign-in. The 5G Hub has its own portal at a different address, and an Outdoor Hub is managed through the Power Hub it connects to. Vodafone publishes no firmware version list.

Sign in to the Vodafone Hub (UK)

  1. Connect your Mac to the hub by Wi-Fi or an Ethernet cable.

  2. Open http://192.168.1.1 in your browser. On a 5G Hub, use http://192.168.0.1.

  3. Enter the password from the label and press Log In.

  4. At your first sign-in, change the password when asked.

  5. On a Power Hub, press the Menu icon (three lines) at the top right to see all settings.

Forgotten a password you changed? Vodafone’s answer is a factory reset, which erases your settings and restores the password on the label.

Change the Power Hub password

  1. Sign in and press the Menu icon at the top right.

  2. Choose Settings › Password › Change Password.

  3. Enter the current password, then the new one twice, and save.

The password needs at least 12 characters and three of: lower case, upper case, numbers and symbols. You’re then sent back to the login page.

Change the 5G Hub password

  1. Sign in at http://192.168.0.1.

  2. Open the Advanced tab, then System › General.

  3. Under Change Password, choose admin or user, and set the new password.

Restart it properly

Vodafone’s Power Hub troubleshooter gives this restart.

  1. Turn the Power Hub off at the mains.

  2. Wait ten seconds.

  3. Turn it back on, then check for a solid white front light.

A factory reset erases all custom settings, including your Wi-Fi name and password. On an Ultra Hub, a flashing blue front light means it is rebooting.

Restart a 5G Outdoor Hub

  1. Find its Power over Ethernet (PoE) cable and turn that off at the mains.

  2. Wait ten seconds before turning it back on.

Factory reset a Power Hub, Ultra Hub or WiFi Hub

  1. Keep the hub turned on.

  2. Push a pin into the reset hole until you hear a click.

  3. Hold it for 10 seconds, then wait for the front lights to turn white.

The hole is next to the power port on the Power Hub, above it on the Ultra Hub, and next to the power button on the WiFi Hub.

Schedule a restart

Vodafone documents no scheduled restart.

Update the firmware

Vodafone documents no manual firmware update or version page for its hubs. On a Power Hub or Ultra Hub, a flashing blue and white front light means an update is in progress.

See connected devices

On part-fibre and full-fibre broadband, Vodafone’s help points you to the My Vodafone app.

  1. Open My Vodafone and go to the Wi-Fi settings.

  2. Tap Connected Devices or My devices, depending on your version of the app.

  3. Tap a device for more detail. Devices that are off appear in the Offline tab.

  4. To block it, tap Block device and confirm with Continue.

Block a device in the Power Hub portal

  1. Sign in, open the Menu and change Basic Mode to Expert Mode.

  2. Open Internet › Block Device.

  3. Click the + button and choose the device from the list.

  4. Press Apply. The device stays blocked until you remove it.

Don’t block the device you’re using. Not all routers can block devices in the app, so use the portal if the option is missing.

List devices on a 5G Hub

  1. Sign in at http://192.168.0.1.

  2. Open the Devices tab to see the Device List with MAC addresses.

UPnP and port forwarding

Vodafone’s help pages document no UPnP IGD, NAT-PMP or port-forwarding setting for its current hubs.

Prioritise calls and gaming

Vodafone documents no QoS or device-priority setting for its current hubs.

2.4 and 5 GHz, and the channel

Your hub normally shows one Wi-Fi network across all bands. Compatibility mode adds a second network for older gadgets such as smart plugs and printers. On an Ultra Hub, it instead creates a Premium WiFi network for newer devices.

  1. Sign in, press the Menu icon and choose Wi-Fi.

  2. Turn on Wi-Fi Compatibility Mode.

  3. Under Secondary Wi-Fi, enter a Wi-Fi Name (SSID) and Wi-Fi Password.

  4. Press Apply.

Devices can drop off briefly and get a new IP address when you turn this on.

In the My Vodafone app

  1. Open the Wi-Fi settings and tap Wi-Fi.

  2. Turn on Compatibility mode, then set its name and password.

If the option isn’t visible, your router doesn’t support it.

On a 5G Hub

  1. Sign in at http://192.168.0.1 and open WiFi Basic Settings.

  2. Turn off 5GHz Prefer.

Change the channel

Vodafone’s current guides document no channel setting.

Mesh: which node a device uses

Vodafone’s WiFi Boosters extend a hub’s Wi-Fi. The app can pair them, or you can use the WPS buttons.

  1. Place the Booster within two metres of the Power Hub and turn it on.

  2. Wait for its front light to flash blue and then turn steady purple.

  3. Press the WPS button on the back of the Power Hub for three seconds.

  4. Press the WPS button on the back of the Booster for three seconds.

  5. Wait for its light to turn steady green, then solid white.

  6. Move the Booster halfway between the hub and the area where Wi-Fi drops out.

The Ultra Hub pairs the same way.

With the My Vodafone app

  1. Open the Wi-Fi settings and tap Add under Add a new Extender.

  2. With a steady purple light on the Booster, tap Continue and Start set up.

  3. Scan the QR code on the back of the Booster. Pairing can take up to 10 minutes.

Guest network

  1. Sign in, press the Menu icon and choose Wi-Fi.

  2. Scroll to Guest Wi-Fi and turn the toggle on.

  3. Keep the name in Wi-Fi Name (SSID) or type your own.

  4. Press Display Characters to see the password, or Change Password to set one.

  5. Press Apply.

Vodafone suggests a password of at least 12 characters. Smart doorbells that won’t join compatibility mode may work on guest Wi-Fi.

In the My Vodafone app

  1. Open the Wi-Fi settings, tap Wi-Fi and turn Guest Wi-Fi on.

  2. Tap edit to change its name and password, and tap Save.

DNS settings

Vodafone’s help pages document no DNS setting for its current hubs. Set DNS on the Mac instead.

Connection status and logs

Vodafone documents the hub’s lights and an online service test, not a line or event log page.

  1. Look at the front light on a Power Hub. Solid white means the power is on.

  2. Check the Internet light. Solid green means connected; flashing red means not connected.

  3. Check the WiFi light. Solid green means Wi-Fi is on; solid amber means it is off.

  4. Run the Broadband Service Test in My Vodafone to check for outages and report a fault.

Solid amber means Wi-Fi was turned off: press the WiFi button. A 5G Hub’s light shows signal: blue for 5G, green for 4G, yellow for poor.

Manuals and downloads

Links go to the maker’s own pages.

Questions

Can I use my own router with Vodafone broadband?

Not on Pro Broadband plans, 5G Broadband or plans with Digital Voice. On other plans you can use one approved by Openreach, once you’ve asked Vodafone for your broadband username and password.

Mac problems on this network

Fixes for what Mac users most often hit on home routers and mesh systems.

Mac drops Wi-Fi or sticks to a far node on mesh Wi-FiOn a mesh network, your Mac drops when it moves between nodes, or stays on a distant one. See how Macs roam and which router settings to change.Guide →Mac Wi-Fi keeps disconnectingYour Mac drops Wi-Fi again and again, not only after sleep. Record when the drops happen, then check the router, roaming, interference and network software.Guide →Mac won't connect to a WPA3 or Wi-Fi 7 routerYour Mac can't join, or keeps dropping, after the router moved to WPA3 or Wi-Fi 7. Check the security mode, PMF and MLO, and the saved network.Guide →Mac can't see or join a 6 GHz Wi-Fi networkYour Mac never uses 6 GHz, or can't find the 6 GHz network. Check Mac support, Wi-Fi 6E mode, WPA3 and the router's 6 GHz settings.Guide →AirPlay or AirPrint stopped working after a new router or meshYour Mac no longer finds the Apple TV, speaker or printer after a router or mesh change. Check the router settings that stop Bonjour discovery, brand by brand.Guide →Wi-Fi printer shows Offline on a MacThe printer is on and connected to Wi-Fi, but the Mac says Offline or Printer not connected. Find the cause and re-add the printer so that it stays online.Guide →Double NAT: a mesh system behind your provider’s routerA mesh system behind your provider's router can create double NAT. See what it breaks, how to spot it from a Mac, and when to use bridge or passthrough mode.Guide →iCloud Private Relay and your router’s security or parental controlsPrivate Relay stops working at home, or your router's security and parental controls stop covering the Mac. See which router features conflict and what to change.Guide →

Sources

Checked on 10 November 2026.

See what your router can’t tell you

Kilobat is a Mac menu-bar app that watches the network from your side: which app is using it, whether the Wi-Fi, the router or the provider is slow, and why a call froze.

Download for Mac ↓
brew install seifip/kilobat/kilobat