Provider box · A1

A1 WLAN Box login, restart, firmware and port forwarding

The A1 WLAN Box is the modem A1 supplies with fixed internet in Austria. Current boxes are made by Zyxel and TP-Link. You manage them in a browser at 10.0.0.138, and the menus are in German.

Sign in
10.0.0.138 or a1modem.home
Password
The sign-in details are on the sticker on the back of a Zyxel box, or underneath a TP-Link box. On a DX3301 the GUI Benutzername (user name) is admin, and the GUI Passwort is on the sticker and the WLAN-Karte (Wi-Fi card).
Models
A1 WLAN Box (Zyxel DX3301), A1 WLAN Box (Zyxel VMG823), A1 WLAN Box (Zyxel DX3101), A1 WLAN Box (TP-Link VX702v)

Checked 10 November 2026. Paths come from A1’s Handy- und Gerätehilfe guides for the Zyxel DX3301 and VMG823 and the TP-Link VX702v, as published in 2026. Zyxel DX3101 sign-in, restart and port forwarding match the DX3301. Some older boxes, and the FRITZ!Box-based A1 Premium WLAN Box, have different menus. A1 gives no firmware version numbers.

Sign in to the A1 WLAN Box

  1. Connect your Mac to the A1 WLAN Box by Wi-Fi or Ethernet.

  2. Open http://10.0.0.138 in your browser. On a TP-Link VX702v, http://a1modem.home also works.

  3. Enter the user name and password from the sticker.

  4. Click Login (Anmeldung on the VMG823, Anmelden on the VX702v).

The VMG823 and VX702v offer a password change at sign-in; choose abbrechen (cancel) or Überspringen (skip) to keep it. A1 only documents a factory reset from inside the web page, so keep the password you set.

Restart it properly

Restart from the web page, or by unplugging the power cable. A full start takes around three minutes.

  1. Sign in and click the menu icon.

  2. Click Neustart (Restart).

  3. Click OK. The A1 WLAN Box restarts by itself.

Only use the supplied power adapter. A1 warns that another one can reduce performance, damage the adapter or cause a fire.

On a TP-Link VX702v

  1. Sign in and click Neustart (Restart).

  2. Click Ja (Yes). The box restarts by itself.

Without the web page

  1. Unplug the power cable from the A1 WLAN Box.

  2. Plug it back in and wait about three minutes.

Schedule a restart

A1 documents no scheduled restart.

Factory reset

This erases your settings. Use it only as a last step.

  1. On a Zyxel box, click the menu icon and open Wartung › Backup/Wiederherstellen (Maintenance › Backup/Restore).

  2. On a VX702v, open Erweiterte Einstellungen › System › Konfigurationsmanagement (Advanced settings › System › Configuration management).

  3. On a Zyxel box, click Reset, then OK.

  4. On a VX702v, click Gerät zurücksetzen (Reset device), then Ja.

Update the firmware

You can check for an update from the web page.

  1. Sign in and click the menu icon.

  2. Open Wartung › Firmware-Upgrade (Maintenance › Firmware upgrade).

  3. Click Update (Aktualisieren on the VMG823).

  4. If an update is available, follow the instructions on screen.

On a DX3301, a slowly flashing power light means the firmware is updating.

On a TP-Link VX702v

  1. Sign in and open the firmware update page, labelled Aktualisie… in A1’s guide.

  2. Click Nach Aktualisierungen suchen (Check for updates).

  3. A new version appears under Neueste Firmware-Version (Latest firmware version).

  4. Click Aktualisieren and follow the instructions on screen.

See connected devices

A1’s guides for these boxes document no connected-devices page or way to block a device.

UPnP and port forwarding

A1’s guides for these boxes document no UPnP IGD or NAT-PMP setting. Forward ports by hand instead, as below.

Forward a port on a Zyxel box

  1. Sign in and click the menu icon.

  2. Open Netzwerkeinstellungen › NAT (Network settings › NAT).

  3. Click Neue Regel hinzufügen (Add new rule).

  4. On a VMG823, tick Aktiv (Active).

  5. Enter your details in the fields, scroll down and click OK.

A1 points to its Guru Serviceline on 0900 664 900 if forwarding doesn’t work. Only open ports you need, as they expose that device to the internet.

Forward a port on a TP-Link VX702v

  1. Sign in and open Erweiterte Einstellungen › NAT › Virtuelle Server (Advanced settings › NAT › Virtual servers).

  2. Click Hinzufügen (Add).

  3. Enter your details in the fields and click OK.

Prioritise calls and gaming

A1’s guides for these boxes document no QoS or device-priority setting.

2.4 and 5 GHz, and the channel

A1 documents changing the Wi-Fi channel, which can reduce interference from nearby networks. It documents no way to split the bands.

  1. Sign in and click the menu icon.

  2. Open Netzwerkeinstellungen › Drahtlos (Network settings › Wireless) on the DX3301, or WLAN on the VMG823.

  3. Under Kanal (Channel), pick a channel from the list.

  4. Scroll down and click ausführen (apply).

Change the channel on a TP-Link VX702v

  1. Sign in and open Erweiterte Einstellungen › WLAN Einstellungen › WLAN-Einstellungen (Wi-Fi settings).

  2. Click Erweiterte Einstellungen on that page.

  3. Choose a value under 2.4GHz Kanal and 5GHz Kanal (channel).

  4. Click Speichern (Save).

Change the Wi-Fi name and password on a DX3301

  1. Sign in and click the arrow next to WLAN Einstellungen (Wi-Fi settings).

  2. Enter a name under WLAN-Name (Wi-Fi name).

  3. If Zufälliges Passwort (Random password) is on, turn it off.

  4. Enter a password under WLAN Passwort, then click Speichern (Save).

Your Wi-Fi drops, so reconnect with the new name and password.

Use WPS

  1. On the device, find the WPS Push Button option in its Wi-Fi settings.

  2. Press the WPS button on the A1 WLAN Box.

  3. Keep the device close by; the two connect automatically.

Mesh: which node a device uses

A1’s guides for these boxes document no mesh setup in the web page. A1 has a separate Mesh WLAN Set (TP-Link HC220-G5) with its own guide.

Guest network

A1’s guides for these boxes document no guest network.

DNS settings

A1’s guides for these boxes document no setting for the DNS servers the box uses or hands out. Set DNS on the Mac instead.

Connection status and logs

A1 documents what the lights on the DX3301 mean. It documents no line or event log page.

  1. Check the power light. Steady green means ready; steady red means a device fault.

  2. A slowly flashing green power light means a firmware update; flashing fast means it’s starting.

  3. On fibre, a steady green connection light means the link to the A1 ONT Box is fine.

  4. A red internet light, steady or flashing, means sign-in to the A1 network failed.

  5. A steady green phone light means the number is registered and ready.

After installation, A1 says it can take up to 24 hours to reach full speed, so leave the box on. The Wi-Fi light flashes orange while WPS is active.

Manuals and downloads

Links go to the maker’s own pages.

Questions

Where is the A1 WLAN Box password?

The GUI password is on the sticker on the back of Zyxel boxes and underneath TP-Link boxes, and on the Wi-Fi card. The Wi-Fi password is on the same sticker, marked WLAN Passwort.

Which address opens the A1 WLAN Box?

Use 10.0.0.138. On a TP-Link VX702v, http://a1modem.home works too.

Mac problems on this network

Fixes for what Mac users most often hit on home routers and mesh systems.

Mac drops Wi-Fi or sticks to a far node on mesh Wi-FiOn a mesh network, your Mac drops when it moves between nodes, or stays on a distant one. See how Macs roam and which router settings to change.Guide →Mac Wi-Fi keeps disconnectingYour Mac drops Wi-Fi again and again, not only after sleep. Record when the drops happen, then check the router, roaming, interference and network software.Guide →Mac won't connect to a WPA3 or Wi-Fi 7 routerYour Mac can't join, or keeps dropping, after the router moved to WPA3 or Wi-Fi 7. Check the security mode, PMF and MLO, and the saved network.Guide →Mac can't see or join a 6 GHz Wi-Fi networkYour Mac never uses 6 GHz, or can't find the 6 GHz network. Check Mac support, Wi-Fi 6E mode, WPA3 and the router's 6 GHz settings.Guide →AirPlay or AirPrint stopped working after a new router or meshYour Mac no longer finds the Apple TV, speaker or printer after a router or mesh change. Check the router settings that stop Bonjour discovery, brand by brand.Guide →Wi-Fi printer shows Offline on a MacThe printer is on and connected to Wi-Fi, but the Mac says Offline or Printer not connected. Find the cause and re-add the printer so that it stays online.Guide →Double NAT: a mesh system behind your provider’s routerA mesh system behind your provider's router can create double NAT. See what it breaks, how to spot it from a Mac, and when to use bridge or passthrough mode.Guide →iCloud Private Relay and your router’s security or parental controlsPrivate Relay stops working at home, or your router's security and parental controls stop covering the Mac. See which router features conflict and what to change.Guide →

Sources

Checked on 10 November 2026.

See what your router can’t tell you

Kilobat is a Mac menu-bar app that watches the network from your side: which app is using it, whether the Wi-Fi, the router or the provider is slow, and why a call froze.

Download for Mac ↓
brew install seifip/kilobat/kilobat