Router · Zyxel

Zyxel router login, restart, firmware and UPnP

Zyxel’s AX, DX, EX and PX Series are Wi-Fi home gateways for fibre, DSL and Ethernet lines. You manage them in a browser through the Web Configurator; a phone app handles mesh setup on some models.

Sign in
192.168.1.1 or zyxel.box
App
MPro Mesh or Zyxel One (iOS and Android), depending on the model
Password
The user name is admin. The password is unique to each router and printed on its label, which is usually on the back. The Wi-Fi name and key are on the same label.
Models
EX3301-T0, EX5601-T1, EX7710-B0, DX3301-T0, DX5401-B1, PX5301-T0, AX7501-B1

Checked 10 November 2026. Paths checked in Zyxel’s AX/DX/EX/PX Series User’s Guide for firmware 5.17–5.70 (Edition 22, May 2025). It covers the AX7501-B0/B1, DX3300-T0/T1, DX3301-T0, DX5401-B0/B1, EX3300-T0/T1, EX3301-T0, EX3500-T0, EX3501-T0, EX3600-T0, EX5401-B0/B1, EX5600-T1, EX5601-T0/T1, EX7501-B0, EX7710-B0, PX3321-T1, PX5301-T0 and PX5302-00. Zyxel says not every model has every feature, so a screen may be absent on yours. Multy, NBG and VMG models have their own guides and aren’t covered here.

Sign in to the Zyxel

Factory default. Zyxel says a router with no password on its label uses admin and 1234. Change it after you sign in.

  1. Connect your Mac to the router’s Wi-Fi, or by Ethernet to the LAN1 port.

  2. Open http://192.168.1.1, or the address printed on the label, such as http://zyxel.box.

  3. Enter admin and the label password, then click Login.

  4. The first time, you’re asked for a new password. The screen shows the rules for your model.

  5. To change it later, open Maintenance › User Account and click the Edit icon.

Forgotten it? With the POWER light steady, hold RESET for more than 5 seconds, until POWER blinks. That restores the label password and 192.168.1.1, and erases all your other settings.

Restart it properly

  1. Sign in and open Maintenance › Reboot.

  2. Click Reboot. Your settings are kept.

  3. On a mesh system, Mesh Reboot on the same screen restarts the whole mesh.

Reset All Settings under Maintenance › Backup/Restore is a factory reset, not a restart.

Schedule a restart

Zyxel documents no scheduled restart on these models.

Update the firmware

Zyxel’s guide describes a manual update. It says to get firmware from your service provider, or from your model’s Downloads & resources tab on Zyxel’s site.

  1. On Connection Status › System Info, note the firmware version, for example V5.70(ACDZ.0)B4.

  2. Download firmware containing the same model code (ACDZ in that example) and unzip it.

  3. Open Maintenance › Firmware Upgrade.

  4. Leave both After Firmware Upgrade reset options cleared to keep your settings.

  5. Click Browse or Choose File, pick the .bin file, then click Upload.

  6. Wait up to 3 minutes while it restarts, then check the version again.

Don’t turn the router off during the upload. Save a copy of your settings first with Maintenance › Backup/Restore › Backup.

The maker’s firmware download page

See connected devices

  1. Sign in. The Connection Status screen opens first.

  2. In Connectivity, click the arrow icon to see each wired and Wi-Fi device’s IP and MAC address.

  3. Hover over a device and click Edit to rename it or change its icon.

  4. In the same place, Internet Blocking cuts a Wi-Fi device off from the internet.

Keep the same address for one device

  1. Open Network Setting › Home Networking › Static DHCP.

  2. Click Static DHCP Configuration.

  3. Under Select Device Info, pick a connected device, or choose Manual Input and type its MAC and IP addresses.

  4. Click OK.

UPnP and port forwarding

Zyxel states UPnP certification, and a separate UPnP NAT-T switch lets apps open ports automatically. The guide doesn’t name IGD or its traffic counters, and doesn’t mention NAT-PMP or a separate “share status” switch. NAT must be on for the connection under Network Setting › Broadband.

  1. Open Network Setting › Home Networking › UPnP.

  2. Under UPnP State, select Enable.

  3. Under UPnP NAT-T State, select Enable so apps can create port mappings.

  4. Click Apply. Active mappings appear in the table on this screen.

Zyxel warns that UPnP apps opening firewall ports can be a security issue, and that UPnP devices can talk to each other freely; turn it off if you don’t want that. TCP port 7547 is reserved for system use. Most models also support Port Control Protocol, at Network Setting › NAT › PCP.

Forward a port by hand

  1. Open Network Setting › NAT, which starts on Port Forwarding.

  2. Click Add New Rule and turn on Active.

  3. Enter a Service Name and choose the WAN Interface.

  4. Enter the same port numbers in Start Port, End Port and both Translation fields.

  5. Enter the Server IP Address, choose the protocol, then click OK.

Prioritise calls and gaming

These routers prioritise outgoing traffic with queues and rules. A smaller queue number means higher priority.

  1. Open Network Setting › QoS › General and switch QoS on.

  2. Enter your upload speed in kbps under WAN Managed Upstream Bandwidth. If blank, the router uses 95% of the line speed.

  3. Set Upstream Traffic Priority Assigned by to None, so your own rules apply, then click Apply.

  4. In Queue Setup, add a queue and give it a priority from 1 to 8.

  5. In Classification Setup, click Add New Classification. Match a device by its MAC and pick the queue.

2.4 and 5 GHz, and the channel

Most models run 2.4 GHz and 5 GHz; the EX7710-B0 adds 6 GHz. With mesh on, one name is forced across the bands and the router steers devices between them.

  1. Open Network Setting › Wireless › General.

  2. To name the bands separately, clear Keep the same settings for the bands.

  3. Choose the Band, then set its network name and security.

  4. Click Apply. If you’re on Wi-Fi, you’ll need to reconnect.

Change the channel

  1. In Network Setting › Wireless › General, choose the Band.

  2. Pick a Channel, or Auto to let the router choose.

  3. Choose a Bandwidth. Zyxel suggests 20MHz to reduce interference with neighbours.

  4. Click Apply.

Scan for busy channels

  1. Open Network Setting › Wireless › Channel Status and pick a band.

  2. Click Scan. Blue bars count access points per channel; the orange bar marks the router’s own.

Mesh: which node a device uses

Most models support MPro Mesh, Zyxel’s version of Wi-Fi Alliance EasyMesh. The router acts as controller and steers devices to a less busy extender or band.

  1. Open Network Setting › Wireless › MESH.

  2. Click the MPro Mesh switch to turn it on.

  3. Add extenders with the MPro Mesh or Zyxel One app; which app depends on your model.

  4. Check the result in the Topology view under Connection Status › Connectivity.

Turning mesh on copies the main 2.4 GHz Wi-Fi name and password to the main 5 GHz network.

Guest network

  1. On Connection Status, find Guest WiFi Settings and switch on the bands you want.

  2. Click the arrow icon to set the guest name and password, then save.

Choose what guests can reach

  1. Open Network Setting › Wireless › Guest/More AP and click the Edit icon next to a network.

  2. Select Guest WLAN.

  3. Set Access Scenario to External Guest for internet only, or Home Guest to include wired home devices.

  4. Click OK. A yellow bulb under Status means the network is on.

DNS settings

By default the router acts as a DNS proxy for your devices.

  1. Open Network Setting › Home Networking › LAN Setup.

  2. Under DNS Values, select Static and enter the DNS server’s address.

  3. Click Apply.

Change the DNS the router itself uses

  1. Open Network Setting › Broadband and click the Edit icon for your connection.

  2. Under DNS Server, select Use Following Static DNS Address.

  3. Enter the Primary DNS Server and Secondary DNS Server, then click Apply.

Connection status and logs

  1. On Connection Status › System Info, click the arrow icon for uptime, firmware, WAN address and DNS servers.

  2. System Monitor › Traffic Status shows bytes sent and received on the WAN port.

  3. System Monitor › Log › System Log lists events. Filter by Level and Category, or click Export Log.

  4. Maintenance › Diagnostic runs ping, traceroute and DNS lookup tests from the router.

Manuals and downloads

Links go to the maker’s own pages.

Questions

What is the default Zyxel router password?

Current models have a random password on the device label, with the user name admin. Zyxel says a router with no password on the label uses admin and 1234.

I can’t reach 192.168.1.1. What should I check?

Make sure you’re on the router’s own network, and only that network. Zyxel suggests checking that your computer’s address is in the same range, and setting one such as 192.168.1.100 by hand if it isn’t.

Mac problems on this network

Fixes for what Mac users most often hit on home routers and mesh systems.

Mac drops Wi-Fi or sticks to a far node on mesh Wi-FiOn a mesh network, your Mac drops when it moves between nodes, or stays on a distant one. See how Macs roam and which router settings to change.Guide →Mac Wi-Fi keeps disconnectingYour Mac drops Wi-Fi again and again, not only after sleep. Record when the drops happen, then check the router, roaming, interference and network software.Guide →Mac won't connect to a WPA3 or Wi-Fi 7 routerYour Mac can't join, or keeps dropping, after the router moved to WPA3 or Wi-Fi 7. Check the security mode, PMF and MLO, and the saved network.Guide →Mac can't see or join a 6 GHz Wi-Fi networkYour Mac never uses 6 GHz, or can't find the 6 GHz network. Check Mac support, Wi-Fi 6E mode, WPA3 and the router's 6 GHz settings.Guide →AirPlay or AirPrint stopped working after a new router or meshYour Mac no longer finds the Apple TV, speaker or printer after a router or mesh change. Check the router settings that stop Bonjour discovery, brand by brand.Guide →Wi-Fi printer shows Offline on a MacThe printer is on and connected to Wi-Fi, but the Mac says Offline or Printer not connected. Find the cause and re-add the printer so that it stays online.Guide →Double NAT: a mesh system behind your provider’s routerA mesh system behind your provider's router can create double NAT. See what it breaks, how to spot it from a Mac, and when to use bridge or passthrough mode.Guide →iCloud Private Relay and your router’s security or parental controlsPrivate Relay stops working at home, or your router's security and parental controls stop covering the Mac. See which router features conflict and what to change.Guide →

Sources

Checked on 10 November 2026.

See what your router can’t tell you

Kilobat is a Mac menu-bar app that watches the network from your side: which app is using it, whether the Wi-Fi, the router or the provider is slow, and why a call froze.

Download for Mac ↓
brew install seifip/kilobat/kilobat