“The version of the server you are trying to connect to is not supported” in Finder on Mac

The Mac does not support the file sharing version of the server. An old NAS or an old server is the usual cause.

Fix this with your agentCopies a prompt for Claude Code, Codex or any agent that can use Terminal.

My Mac has this problem: “The version of the server you are trying to connect to is not supported” in Finder on Mac. Read https://kilobat.app/guides/finder-server-version-not-supported.md and work through it with me. Install the Kilobat CLI if it’s missing: brew install seifip/kilobat/kilobat. Run the guide’s Terminal and kilobat checks yourself and tell me what you find. List the steps only I can do. Ask before you change any setting.

Applies to: macOS 13 Ventura and later. The text was checked in NetAuthAgent on macOS 27.2.Checked: 10 November 2026

Symptoms

  • Finder shows “The version of the server you are trying to connect to is not supported.”
  • The message says to contact your system administrator.
  • The server is old or a NAS with old firmware.

Likely causes

  • An old file sharing version on the server. The server offers an old protocol that the Mac no longer uses.
  • A NAS with old firmware. The maker has a newer version.
  • A wrong protocol in the address. The URL uses a protocol that the server does not offer.

How to check

  1. Test that the server answers on the file sharing port. SMB uses port 445.

    nc -vz -G 5 server.local 445
  2. Try the address instead of the name. Use Go › Connect to Server and type smb://192.168.1.10.

  3. Check that your Mac is on the same network as the server. Look at the Network settings.

How to fix it

  1. Update the firmware of the NAS or the server software.

  2. Turn on SMB 3 or SMB 2 in the file sharing settings of the server.

  3. Try smb:// in place of another prefix in Go › Connect to Server.

  4. Contact your system administrator, as the message says.

With Kilobat

  1. Test the TCP connection to port 445. It says connected, refused or no answer.

    kilobat why server.local:445
  2. With Kilobat Pro, Devices checks the open ports of the server. It shows whether it offers SMB, AFP or NFS.

  3. A NAS with a web page gets a link to it, so you can update its firmware.

Questions

Can I change the Mac to use old SMB?

Do not. Update the server.

Is the network at fault?

No. The server answered with a version that the Mac cannot use.

Sources

Checked on 10 November 2026.