“Legacy Access Point” and “802.11b provides suboptimal performance” on Mac

The label means that the router offers the old 802.11b rates. Those rates are slow, and a legacy mode can slow the whole network.

Fix this with your agentCopies a prompt for Claude Code, Codex or any agent that can use Terminal.

My Mac has this problem: “Legacy Access Point” and “802.11b provides suboptimal performance” on Mac. Read https://kilobat.app/guides/wifi-legacy-access-point.md and work through it with me. Install the Kilobat CLI if it’s missing: brew install seifip/kilobat/kilobat. Run the guide’s Terminal and kilobat checks yourself and tell me what you find. List the steps only I can do. Ask before you change any setting.

Applies to: macOS 14 Sonoma and later. The text was checked in WiFiSettingsKit on macOS 27.2.Checked: 29 October 2026

Symptoms

  • System Settings › Wi-Fi shows “Legacy Access Point” and “802.11b provides suboptimal performance.”
  • A note suggests that you upgrade to an 802.11n/ac router.
  • Wi-Fi is slower than the internet plan.

Likely causes

  • An old router. The router can run only old standards.
  • A legacy radio mode on a new router. A setting for 802.11b compatibility is on, to support very old devices.
  • A router in 2.4 GHz only mode. Wi-Fi on 2.4 GHz is more likely to show legacy rates.

How to check

  1. Open System Settings › Wi-Fi, click Details and look at the PHY mode and the rates.

  2. Show the current Wi-Fi link in Terminal. Look at the PHY Mode and the Transmit Rate.

    system_profiler SPAirPortDataType
  3. Open the router page and look at the radio mode.

How to fix it

  1. Open the router page. Set the radio mode to the setting that enables all modes, or to Wi-Fi 2 through Wi-Fi 6 or later. Apple lists this as the recommended setting.

  2. Turn on every band that the router supports, such as 5 GHz and 6 GHz.

  3. Update the router firmware. If the router is very old, replace it with an 802.11n/ac or newer router.

  4. Join a faster band. See 2.4 GHz, 5 GHz and 6 GHz Wi-Fi on a Mac.

With Kilobat

  1. Show the link rate, the band and the signal of the Wi-Fi now.

    kilobat wifi status
  2. The CLI is free. In the app, the advice from these checks is part of Kilobat Pro. See Find why one site or API won't connect.

Questions

Does 802.11b mean that all devices use slow rates?

Not always, but an access point that offers legacy rates can lower the speed for other devices on the same channel.

Should I turn off every old mode?

Apple's guidance is to enable the modes the router offers so that each device can use its fastest mode. Remove only a legacy mode that no device needs.

Can the Mac fix this?

No. Change the router.

Sources

Checked on 29 October 2026.