“The cable for Ethernet is connected, but your computer does not have an IP address”

The link is up, but the Mac has not got an address. DHCP did not answer, or the manual settings are wrong.

Fix this with your agentCopies a prompt for Claude Code, Codex or any agent that can use Terminal.

My Mac has this problem: “The cable for Ethernet is connected, but your computer does not have an IP address”. Read https://kilobat.app/guides/ethernet-connected-no-ip-address.md and work through it with me. Install the Kilobat CLI if it’s missing: brew install seifip/kilobat/kilobat. Run the guide’s Terminal and kilobat checks yourself and tell me what you find. List the steps only I can do. Ask before you change any setting.

Applies to: All current macOS versions. The text was checked in Network settings on macOS 27.2.Checked: 10 November 2026

Symptoms

  • System Settings › Network shows Ethernet with a red or orange dot.
  • The status says that the cable is connected, but the computer does not have an IP address.
  • Wi-Fi works, but Ethernet does not.

Likely causes

  • No DHCP answer. The router or switch does not give an address. A VLAN or port setting can block it.
  • Manual settings that do not fit. An old fixed address or router address from another network.
  • A switch or port that needs approval. Some managed networks need 802.1X or a known device.
  • A faulty adapter. The link comes up, but frames do not pass.

How to check

  1. Show the settings of the Ethernet service. Use the service name from System Settings.

    networksetup -getinfo Ethernet
  2. Show the address of the port. No inet line means no address.

    ifconfig en5
  3. Check whether Configure IPv4 says Using DHCP. Open System Settings › Network › Ethernet › Details › TCP/IP.

How to fix it

  1. Set Configure IPv4 to Using DHCP, then click Renew DHCP Lease. See Renew the DHCP lease on a Mac.

  2. Try another port on the router or switch, then another cable.

  3. Restart the router. If the problem stays, test the cable with another computer.

  4. On a company network, ask the administrator whether the port needs approval.

  5. If an address starts with 169.254, see Mac has a self-assigned IP address.

With Kilobat

  1. Show the adapter, its link and its network service.

    kilobat wired
  2. Kilobat says when a cable is plugged in but nothing gave the Mac an address. It also says when the service is missing or inactive.

  3. Check Wi-Fi, the router, the internet, DNS and login pages in one step.

    kilobat diagnose
  4. If one site or service fails, find the layer that stops it.

    kilobat why example.com
  5. The CLI is free. In the app, Health shows the wired link for free, and the findings and advice are part of Kilobat Pro. See Find why one site or API won't connect.

Questions

Is this the same as a self-assigned address?

Related. A self-assigned address means that the Mac gave itself an address. This message shows when it has none.

Does a restart help?

It can. A restart makes the Mac ask for an address again.

Why does Wi-Fi work?

Wi-Fi uses its own link and address. The fault is on the Ethernet path.

Sources

  • Error text in Network.appex (System Settings), macOS 27.2 (Localizable.loctable)
  • networksetup(8) and ifconfig(8), man page installed with macOS 27.2

Checked on 10 November 2026.