“Cable unplugged” for Ethernet on Mac
macOS shows this when the Ethernet link is down. Either the cable is not plugged in, or the device at the other end does not answer.
My Mac has this problem: “Cable unplugged” for Ethernet on Mac. Read https://kilobat.app/guides/ethernet-cable-unplugged.md and work through it with me. Install the Kilobat CLI if it’s missing: brew install seifip/kilobat/kilobat. Run the guide’s Terminal and kilobat checks yourself and tell me what you find. List the steps only I can do. Ask before you change any setting.
Symptoms
- System Settings › Network shows Ethernet with the status “Cable unplugged”.
- The message says that either the cable is not plugged in or the device at the other end is not responding.
- A USB or Thunderbolt adapter shows a similar message.
Likely causes
- A loose or damaged cable. The link needs both ends and every wire pair.
- The switch or router port is off or has failed. The device at the other end does not answer.
- A faulty adapter or dock. The adapter can lose power or its driver.
- The wrong service. The cable can sit in another port than the service that you look at.
How to check
List the hardware ports. Look for the Ethernet port or adapter.
networksetup -listallhardwareportsShow the link state for the port. Look for
status: activeorinactive. Use the device name from the list.ifconfig en5Look at the lights on the router or switch port. No light means no link.
Try another cable and another port on the switch.
How to fix it
Press both ends of the cable in until they click.
Try another cable, then another port on the router or switch.
Try another adapter, dock or USB-C port. See Mac does not detect a USB or Thunderbolt Ethernet adapter.
Restart the router or switch if no device gets a link.
Restart the Mac. Then check System Settings › Network again.
With Kilobat
Show each Ethernet port. A port with nothing linked reads No cable.
kilobat wiredAfter the link comes back, check the whole path.
kilobat diagnoseThe CLI is free. In the app, the advice from these checks is part of Kilobat Pro. See Find why one site or API won't connect.
Questions
What if the cable is fine on another computer?
Then the Mac, the adapter or its port is the cause. Test another adapter.
Why does a good cable show unplugged?
The message also covers a device that does not answer, such as a switch port that is off.
What changes when the cable connects but no IP address arrives?
That is a different message. See “The cable for Ethernet is connected, but your computer does not have an IP address”.
Sources
- Error text in Network.appex (System Settings), macOS 27.2 (Localizable.loctable)
- networksetup(8) and ifconfig(8), man page installed with macOS 27.2
Checked on 10 November 2026.