Show guests the Wi-Fi you measured.

Give hotel and coworking guests more than a Wi-Fi icon. Share a dated measurement, where it was taken, and a way to check for themselves.

  • Free
  • No account
  • No subscription

Guest information

Wi-Fi at Harbour House

Harbour House

Lobby, MacBook Air, guest Wi-Fi

Observed upload
24.8 Mbps
Median response
28 ms
Response variation
4 ms

Measured

Method & limitations

Check your connectionKilobat

Upload24.8 Mbps · 2026-11-01
Sample venue and readings

“Free Wi-Fi” leaves a lot unanswered.

A useful reading has a place, a time and a method. Keep those details next to the numbers so guests know exactly what they’re looking at.

  • A place and a time.Room, device and measurement date travel with the result. Old readings never pretend to be live.
  • The useful numbers.Upload, latency and jitter, with the test method beside them. No invented reliability score.
  • A way to check.Every exported card includes a guest test link. Tests run only when the guest chooses to start.

Your first evidence card.

Connect to the guest Wi-Fi, run a short check, then choose a card or small badge for your own website. No account or integration required.

Build your evidence card

Measure

Connect to the guest network in the room you want to show.

Up to 45 seconds. A lightweight HTTP observation, not a full line-speed test. No test starts automatically.

Describe

Measurements and method Filled in by the check, or enter your own
Fit your website

A snapshot, with the context intact.

Your card will appear here after you enter a measurement.

The badge includes its measurement date and is a static image. Use PNG for CMSs that block SVG, or SVG for sharp scaling. Upload it to your CMS and link it to your full Wi-Fi details. It never implies a live status. The exported card is static. Update it when you retest. Publishing shares everything you enter with your guests; leave out personal names, IP addresses and Wi-Fi passwords.
Have more than one room or network?Compare up to 12 observations side by side, signal and performance kept apart.Compare observations

A room-by-room picture, with the details that matter.

Add real observations from different rooms, networks or times. Signal and Internet performance appear separately. Missing readings stay missing.

Using Kilobat Rooms on Mac? Copy a saved room’s signal (dBm), room label and measurement time. Rooms records signal and access points; it does not supply upload, latency or jitter measurements. Enter those separately only if you measured them. There is no automatic Rooms import here.

Use public-friendly network labels such as “Guest Wi-Fi”, not private SSIDs or BSSIDs. No files, fingerprints or results are uploaded. Reloading clears this comparison. Only the HTML you choose to publish leaves your browser.

Add an observation

Signal observation (optional)Enter a measured signal from Rooms or another Wi-Fi tool. Closer to zero is stronger. Signal does not measure Internet speed.
Separate performance test (optional)
Use the date above only if these measurements belong to the same observation. Otherwise add a separate row. Keep the test endpoint and jitter definition in the method.

Every reading keeps its context.

Add at least two observations to compare. One room on two networks works too.

Review every label before publishing. Measurements are self-reported, not certified. Repeat tests at busy times; this is not an uptime report.

A small connection check for your help page.

Let guests test from their own device before contacting support. No test runs until they accept the data-use notice and press Start. Results stay with the guest.

Use theme=dark for dark pages, or add &size=compact for a shorter 440 px frame. Minimum recommended width: 280 px. The frame scrolls on smaller screens. Small Kilobat attribution; no ads or forced signup.

Kilobat for Mac

Walk the building. Keep every room’s signal.

Rooms in Kilobat’s Radar saves each room’s signal and the access point your Mac was on, then lists them side by side. It flags rooms at the edge of your Wi-Fi, or where the Mac stayed on a far access point, and says so when every room is fine.

Download for Mac ↓
brew install seifip/kilobat/kilobat
  • Lobby−54 dBm
  • Room 204−61 dBm
  • Courtyard−73 dBmEdge of your Wi-Fi
  • Meeting room−58 dBm

Questions

Is this a Wi-Fi certification?

No. Cards contain operator-reported measurements. Kilobat does not independently verify them. A single measurement is not a guarantee of future speed, coverage, stability or suitability for calls.

What should I measure?

Use the actual guest network, in a room or workspace guests use. Record upload throughput, median latency, jitter, the device, test destination and time. Repeat at busy times for a more useful picture.

Can I use Kilobat Rooms?

Yes, for manually entered signal observations in the optional comparison. Rooms saves signal and access-point observations; it does not automatically provide upload, latency or jitter results. There is no automatic import here.

Where is the data stored?

Your entries stay in this browser tab and are cleared on reload. Copying the generated HTML gives you a static card to publish on your own website. Leave out personal details, network fingerprints and passwords.

Does it cost anything?

No. The card builder, the badge, the room comparison and the guest connection check are free, with no account, subscription or ads.