What is Plex Media Server?
Plex Media Server shares your media with other devices. It listens for connections, so its network use differs from most apps. Plex documents its ports and settings.
I want to know what Plex Media Server is doing on my Mac and whether its network use is normal. Read https://kilobat.app/processes/plex.md and work through it with me. Install the Kilobat CLI if it’s missing: brew install seifip/kilobat/kilobat. Run the guide’s Terminal and kilobat checks yourself and tell me what you find. List the steps only I can do. Ask before you change any setting.
Short answer
Plex's media server for Mac. It listens on TCP port 32400 and, for Remote Access, asks the router to forward a port through UPnP or NAT-PMP.
Block with care
Blocking TCP 32400 stops other devices from reaching your library. Block Plex only if you do not want to share media.
- Path
/Applications/Plex Media Server.app
What it is
Plex's installation article says that Plex Media Server has no window of its own. You manage it in the Plex Web App, in a browser.
On a Mac, you drag the app to the Applications folder and launch it from there. Plex says that you then open the web app from the > icon in the menu bar.
Plex says that the most important port is TCP 32400. The firewall on the server must allow it. Plex marks it as required.
The Plex Web App is reachable on that port. Plex gives http://127.0.0.1:32400/web as the address on the same Mac, and http://server.local.ip.address:32400/web from another device on the network.
Plex lists other ports for the local network. UDP 1900 and TCP 32469 serve DLNA. UDP 5353 serves older Bonjour discovery.
UDP 32410, 32412, 32413 and 32414 serve GDM discovery. TCP 8324 controls Plex for Roku through Plex Companion.
Plex says that the settings Settings › Server › Remote Access let you reach the server from outside your network. They require you to be signed in to a Plex account.
Why it uses the network
- Serving your media. Other Plex apps connect to TCP port 32400 to browse and play your library.
- Remote Access. Plex says that the server first tries to configure a connection through your router with UPnP or NAT-PMP. It can also use a port that you forward by hand.
- Reachability checks. Plex says that the server sends an HTTP request to plex.tv whenever you open the server settings. A worker then tries to reach your server from outside.
- Local discovery. Plex's Network settings include GDM, which lets Plex apps and servers find each other on the local network.
- Relay. Plex says that Relay connects clients through a proxy when the server is not reachable otherwise. Relay connections are limited in bandwidth.
How much is normal
Plex does not publish figures for idle traffic. With no one watching, you should expect small traffic to plex.tv and on the local network.
Streaming is the main use. Plex lets you cap the upload speed and the bitrate of each remote stream. Some of these limits need a Plex Pass.
Plex says that remote playback of video needs a Remote Watch Pass or a Plex Pass. Music and photos stream remotely without one.
When it uses a lot, and why
- Remote streams. Each remote stream uploads at the stream's bitrate. Plex lets you set a limit per stream under Remote Access.
- Downloads for offline use. Plex says that upload traffic for Downloads scales back when streaming needs the bandwidth. It uses what is left, up to your limit.
- Relay. Plex says that Relay is bandwidth limited. It is used when the server cannot be reached directly.
Is it safe to block?
Block with care
Blocking TCP 32400 stops other devices from reaching your library. Block Plex only if you do not want to share media.
What breaks if you block it
- Other Plex apps on your network cannot connect to the server.
- Remote Access fails when the port is blocked or when the checks from plex.tv cannot reach the server.
- Devices that use DLNA or GDM discovery stop finding the server when their ports are blocked.
Blocking means a firewall rule that refuses its connections. Don’t quit or disable a macOS process to save data: macOS starts it again, and other features depend on it.
Reduce its use
Open Settings › Server › Remote Access in the Plex Web App. Turn Remote Access off if you only use Plex at home.
In Settings › Server › Network, turn off local network discovery (GDM) if your network has many devices. Plex advises this for large networks.
Set a limit under Remote Access for the upload speed and for each remote stream.
See how much it uses
Open Activity Monitor and search for Plex. Open the Network tab to see the bytes that the server and its helpers moved.
With Kilobat
In the Kilobat app list, search for
Plex.Ask the same question in Terminal.
kilobat explain "Plex Media Server"
The live view and the explanations are free. History in the app needs Kilobat Pro. Blocking needs Pro and the network filter: see the network filter, Protection and the hotspot data saver.
What isn’t documented
Plex's articles do not give the bundle ID or the helper process names for the Mac server. They do not say how much data an idle server uses.
The ports article is dated February 2021. Check Plex's current article if your version behaves differently.
Plex gives a list of worker addresses that test Remote Access. The list changes, so it is not repeated here.
Questions
Which port does Plex Media Server use?
Plex says that the main port is TCP 32400. Its firewall article marks it as required.
Should I forward the extra Plex ports on my router?
Plex strongly advises against it on a machine with a public address. It says that this does not apply to most users.
Sources
- Plex Support: What network ports do I need to allow through my firewall?
- Plex Support: Remote Streaming (Setting Up Remote Access)
- Plex Support: Troubleshooting Remote Access
- Plex Support: Network
- Plex Support: Installation
- Kilobat docs: Connections
Checked on 8 November 2026.