What is NordVPN?
NordVPN sends your traffic through an encrypted tunnel to a Nord server. The ports that the tunnel uses depend on the protocol that you choose in the app.
I want to know what NordVPN is doing on my Mac and whether its network use is normal. Read https://kilobat.app/processes/nordvpn.md and work through it with me. Install the Kilobat CLI if it’s missing: brew install seifip/kilobat/kilobat. Run the guide’s Terminal and kilobat checks yourself and tell me what you find. List the steps only I can do. Ask before you change any setting.
Short answer
NordVPN's VPN client. Nord lists the outbound ports for each protocol, such as UDP 51820 for NordLynx and TCP 443 or UDP 1194 for OpenVPN.
Block with care
Blocking NordVPN's ports stops the tunnel from connecting. Block only the protocol that you do not use, such as OpenVPN, if you use NordLynx.
- Path
/Applications/NordVPN.app
What it is
NordVPN's support article on open ports says that all ports are open on its servers for outgoing connections, except SMTP and NetBIOS. It says that Nord does not provide port forwarding, so no incoming connections pass through.
The article lists ports for use if a second firewall clashes with the VPN. OpenVPN TCP uses 443 and 1231 to 1234. OpenVPN UDP uses 1194 and 1231 to 1234. NordLynx uses UDP 51820.
For IKEv2 it lists UDP 500 and UDP 4500 before a NAT firewall, or UDP 500 and TCP 4500 after one. For a SOCKS5 proxy it lists UDP or TCP 1080.
A separate article on OpenVPN says that TCP connections use port 443 and UDP connections use port 1194.
NordVPN names three protocols in its guide on which to choose. They are OpenVPN, NordLynx, which is Nord's version of WireGuard and the default in most apps, and NordWhisper.
Nord says that NordWhisper is for restrictive networks, such as office, campus, airport, café and hotel networks. It says that NordWhisper is available on macOS.
Why it uses the network
- The VPN tunnel. The app sends your traffic to a Nord server over the protocol that you chose.
- Protocol choice. NordLynx is the default in most apps. Nord suggests NordWhisper where a network filters VPN traffic.
- Firewall tuning. Nord lists the ports so that you can change a firewall that slows the VPN down. Its article describes this as a fix for a clash between the firewall and the VPN.
How much is normal
While connected, your Mac's traffic goes through the tunnel. Its size is the size of what your apps send, plus overhead.
Nord's pages give no figure for the overhead or for idle traffic.
You will see connections to Nord server addresses on the port of your protocol, such as UDP 51820 for NordLynx.
When it uses a lot, and why
- Downloads and streaming. Anything that your apps transfer while the VPN is connected goes through the tunnel.
- A second protocol. Each protocol uses its own ports, as Nord's list shows, so a change of protocol changes the ports that you see.
- A SOCKS5 proxy. Nord lists port 1080, over UDP or TCP, for its SOCKS5 proxy. Traffic that you send through it adds to the total.
Is it safe to block?
Block with care
Blocking NordVPN's ports stops the tunnel from connecting. Block only the protocol that you do not use, such as OpenVPN, if you use NordLynx.
What breaks if you block it
- The VPN cannot connect on a protocol whose ports are blocked.
- If you block UDP 51820 and use NordLynx, the tunnel fails.
- Blocking TCP 443 also affects normal web traffic, so use a rule for the app instead.
Blocking means a firewall rule that refuses its connections. Don’t quit or disable a macOS process to save data: macOS starts it again, and other features depend on it.
Reduce its use
To change the protocol, click the gear icon in the app, choose General, and click the current protocol.
On a network that blocks VPNs, choose NordWhisper from the same list. Nord recommends it for restrictive networks.
If a second firewall slows the VPN, allow the ports for your protocol from Nord's list.
See how much it uses
Open Activity Monitor and search for
Nord. The Network tab shows the bytes that the app sent and received.
With Kilobat
In the Kilobat app list, search for
Nord. Its row shows the live rate and the hosts that it talks to.Ask the same question in Terminal.
kilobat explain NordVPN
The live view and the explanations are free. History in the app needs Kilobat Pro. Blocking needs Pro and the network filter: see the network filter, Protection and the hotspot data saver.
What isn’t documented
Nord's pages do not give the port that NordWhisper uses. They do not name the hosts that the app contacts for sign-in, server lists or updates.
The pages do not name the processes or the network extension that the Mac app shows. The app path here is the usual install name, not a path from Nord.
Nord's port list is for its servers and manual set-ups. It does not say which ports the Mac app tries first.
Questions
Which port does NordLynx use?
Nord lists UDP 51820 for NordLynx.
Which ports does OpenVPN use with NordVPN?
Nord lists TCP 443 and UDP 1194. Its open-ports article adds 1231 to 1234 for both TCP and UDP.
Does NordVPN support port forwarding?
Nord says that it does not provide port forwarding, so no incoming connections can go through.
Sources
- NordVPN Support: What open ports does NordVPN offer?
- NordVPN Support: OpenVPN connection on NordVPN
- NordVPN Support: Which NordVPN protocol should I choose
- NordVPN Support: How to use NordWhisper on NordVPN
Checked on 8 November 2026.