What is jitter? Why it breaks calls and games

Jitter is how much the delay changes from one packet to the next. High jitter makes audio choppy and video freeze, even when the average latency is low.

Fix this with your agentCopies a prompt for Claude Code, Codex or any agent that can use Terminal.

My Mac has this problem: What is jitter? Why it breaks calls and games. Read https://kilobat.app/guides/what-is-jitter.md and work through it with me. Install the Kilobat CLI if it’s missing: brew install seifip/kilobat/kilobat. Run the guide’s Terminal and kilobat checks yourself and tell me what you find. List the steps only I can do. Ask before you change any setting.

Applies to: All current macOS versions.Checked: 8 November 2026

When this helps

  • Audio in calls cuts out or sounds robotic, but speed tests look fine.
  • Your ping in a game jumps up and down.
  • A call app shows a jitter value and you want to know if it is high.

What jitter is

Packets should arrive at even intervals. On a real network, some take longer than others. Jitter measures that variation.

Microsoft describes jitter as a measure of the variation in packet delay for a data stream. It says that when jitter is too high, audio can become choppy.

Latency is the delay. Jitter is how unsteady that delay is. A link with a steady 60 ms is better for a call than a link that swings between 20 ms and 120 ms.

What values are good

  • Zoom. Recommends a jitter of 40 ms or less.
  • Microsoft Teams. Lists less than 30 ms as the good threshold for jitter in its Real-Time Analytics report. Microsoft says that article describes an earlier experience in the Teams admin center.
  • Games. Game makers rarely give a figure. As a rule of thumb, lower is better, and a steady ping beats a low but spiky one.

Measure it on a Mac

  1. Open Terminal. Send 50 packets to a public server.

    ping -c 50 1.1.1.1
  2. Read the last line. The stddev value is a simple guide to jitter, in ms.

  3. Look at the individual time= values. Large jumps between lines mean high jitter.

  4. Repeat the test to your router. If the router is steady and the internet is not, the cause is past your network.

The ping stddev is a rough guide. Call apps compute jitter in their own way, so the values do not match exactly.

What causes jitter

With Kilobat

  1. Ping every 50 ms for 20 seconds. Kilobat reports spikes and how regular they are.

    kilobat stutter
  2. To test the internet instead of the router, give a target.

    kilobat stutter --target internet
  3. kilobat diagnose measures latency, jitter and loss to the router and the internet in one run.

    kilobat diagnose

Questions

Is jitter the same as latency?

No. Latency is the delay of a packet. Jitter is the change in that delay from packet to packet.

Can I have low ping and high jitter?

Yes. The average can be low while single packets arrive late. Calls and games notice the late packets.

Does a faster plan lower jitter?

Not by itself. Jitter comes from Wi-Fi, queues and paths. A busy link or a weak signal causes it, whatever the plan speed.

Sources

Checked on 8 November 2026.