“The VPN server did not respond” on Mac

The Mac sent its request, and nothing came back. The address, a firewall, the network or the server can cause it.

Fix this with your agentCopies a prompt for Claude Code, Codex or any agent that can use Terminal.

My Mac has this problem: “The VPN server did not respond” on Mac. Read https://kilobat.app/guides/vpn-server-did-not-respond.md and work through it with me. Install the Kilobat CLI if it’s missing: brew install seifip/kilobat/kilobat. Run the guide’s Terminal and kilobat checks yourself and tell me what you find. List the steps only I can do. Ask before you change any setting.

Applies to: macOS 13 Ventura and later. The text was checked in PPPController on macOS 27.2.Checked: 29 October 2026

Symptoms

  • System Settings › VPN shows “The VPN server did not respond.”
  • The VPN worked before, or works on another network.
  • The status shows Connecting, then fails.

Likely causes

  • A wrong server address. One wrong character sends the request to the wrong host.
  • A network that blocks VPN traffic. Hotels, schools and some home routers block VPN protocols.
  • The server is down. The server or its firewall does not answer.
  • A change after an update. A macOS update can change a VPN profile. See VPN stopped working after a macOS update.

How to check

  1. Check the server address in System Settings › VPN. Look for typing errors and extra spaces.

  2. Test that the server answers. Look up its name.

    dscacheutil -q host -a name vpn.example.com
  3. List the VPN services and their state.

    scutil --nc list
  4. Try another network, such as a phone hotspot. If it works, the first network blocks the VPN.

How to fix it

  1. Correct the server address. Ask the VPN provider for the exact value.

  2. Try another network. If it works, ask the network owner to allow the VPN.

  3. Ask the provider whether the server is up and whether it needs a new profile.

  4. Remove the VPN service in System Settings › VPN and add it again.

With Kilobat

  1. Test the server name and the path to it before you try the VPN again.

    kilobat why vpn.example.com
  2. The CLI is free. In the app, the advice from these checks is part of Kilobat Pro. See Find why one site or API won't connect.

Questions

Is this the same as the L2TP message?

It is the general message. The L2TP one names the protocol. See “The L2TP-VPN server did not respond” on Mac.

Does a restart help?

Rarely. Fix the address, the network or the server.

Sources

Checked on 29 October 2026.