“The IP address cannot be the same as the router address”
You typed a fixed address that is the same as the router address. A device cannot use the address of its own router.
My Mac has this problem: “The IP address cannot be the same as the router address”. Read https://kilobat.app/guides/ip-address-cannot-be-same-as-router-address.md and work through it with me. Install the Kilobat CLI if it’s missing: brew install seifip/kilobat/kilobat. Run the guide’s Terminal and kilobat checks yourself and tell me what you find. List the steps only I can do. Ask before you change any setting.
Symptoms
- An alert says “The IP address cannot be the same as the router address.”
- The Apply or OK button does not save the settings.
- You set Configure IPv4 to Manually.
Likely causes
- A typing error. The IP address and Router fields hold the same value.
- The wrong router address. The router field holds your own address.
- A copy from another device. You copied the settings of the router or another host.
How to check
Find the router address that DHCP gives. Use Using DHCP first, then read the Router line.
networksetup -getinfo Wi-FiCompare the two fields in System Settings › Network › Details › TCP/IP.
How to fix it
Put the router address in the Router field. Put a different free address in the IP Address field.
Use an address in the same subnet, with the same subnet mask.
Choose an address that no DHCP server gives. See IP address conflict on a Mac.
Or set Configure IPv4 back to Using DHCP.
Questions
What is a free address?
One that the router does not give to other devices. Check the DHCP range on the router.
Should I use DHCP instead?
Yes, unless a device needs a fixed address. A DHCP reservation on the router is safer.
Sources
- Error text in Network.appex (System Settings), macOS 27.2 (Localizable.loctable)
- networksetup(8), man page installed with macOS 27.2
Checked on 29 October 2026.