---
title: "Zyxel router login, restart, firmware and UPnP: a practical guide"
url: "https://kilobat.app/routers/zyxel"
description: "Sign in to a Zyxel EX, DX, PX or AX router at 192.168.1.1, restart it, update firmware, turn on UPnP, set guest Wi-Fi, DNS and channels."
---

Router · Zyxel

# Zyxel router login, restart, firmware and UPnP

Zyxel’s AX, DX, EX and PX Series are Wi-Fi home gateways for fibre, DSL and Ethernet lines. You manage them in a browser through the **Web Configurator**; a phone app handles mesh setup on some models.

Sign in

`192.168.1.1` or `zyxel.box`

App

MPro Mesh or Zyxel One (iOS and Android), depending on the model

Password

The user name is `admin`. The password is unique to each router and printed on its label, which is usually on the back. The Wi-Fi name and key are on the same label.

Models

EX3301-T0, EX5601-T1, EX7710-B0, DX3301-T0, DX5401-B1, PX5301-T0, AX7501-B1

**Checked 10 November 2026.** Paths checked in Zyxel’s AX/DX/EX/PX Series User’s Guide for firmware 5.17–5.70 (Edition 22, May 2025). It covers the AX7501-B0/B1, DX3300-T0/T1, DX3301-T0, DX5401-B0/B1, EX3300-T0/T1, EX3301-T0, EX3500-T0, EX3501-T0, EX3600-T0, EX5401-B0/B1, EX5600-T1, EX5601-T0/T1, EX7501-B0, EX7710-B0, PX3321-T1, PX5301-T0 and PX5302-00. Zyxel says not every model has every feature, so a screen may be absent on yours. Multy, NBG and VMG models have their own guides and aren’t covered here.

## Sign in to the Zyxel

**Factory default.** Zyxel says a router with no password on its label uses `admin` and `1234`. Change it after you sign in.

1. Connect your Mac to the router’s Wi-Fi, or by Ethernet to the **LAN1** port.
2. Open `http://192.168.1.1`, or the address printed on the label, such as `http://zyxel.box`.
3. Enter `admin` and the label password, then click **Login**.
4. The first time, you’re asked for a new password. The screen shows the rules for your model.
5. To change it later, open **Maintenance › User Account** and click the **Edit** icon.

Forgotten it? With the **POWER** light steady, hold **RESET** for more than 5 seconds, until **POWER** blinks. That restores the label password and `192.168.1.1`, and erases all your other settings.

## Restart it properly

1. Sign in and open **Maintenance › Reboot**.
2. Click **Reboot**. Your settings are kept.
3. On a mesh system, **Mesh Reboot** on the same screen restarts the whole mesh.

**Reset All Settings** under **Maintenance › Backup/Restore** is a factory reset, not a restart.

### Schedule a restart

Zyxel documents no scheduled restart on these models.

**Kilobat can help.** Kilobat Pro’s [router check-up](https://kilobat.app/docs/home-network#router-checkup) learns how fast this router usually answers, says when a restart is due, and checks the next day whether it helped.

## Update the firmware

Zyxel’s guide describes a manual update. It says to get firmware from your service provider, or from your model’s **Downloads & resources** tab on Zyxel’s site.

1. On **Connection Status › System Info**, note the firmware version, for example `V5.70(ACDZ.0)B4`.
2. Download firmware containing the same model code (`ACDZ` in that example) and unzip it.
3. Open **Maintenance › Firmware Upgrade**.
4. Leave both **After Firmware Upgrade** reset options cleared to keep your settings.
5. Click **Browse** or **Choose File**, pick the `.bin` file, then click **Upload**.
6. Wait up to 3 minutes while it restarts, then check the version again.

Don’t turn the router off during the upload. Save a copy of your settings first with **Maintenance › Backup/Restore › Backup**.

[The maker’s firmware download page](https://www.zyxel.com/service-provider)

## See connected devices

1. Sign in. The **Connection Status** screen opens first.
2. In **Connectivity**, click the arrow icon to see each wired and Wi-Fi device’s IP and MAC address.
3. Hover over a device and click **Edit** to rename it or change its icon.
4. In the same place, **Internet Blocking** cuts a Wi-Fi device off from the internet.

### Keep the same address for one device

1. Open **Network Setting › Home Networking › Static DHCP**.
2. Click **Static DHCP Configuration**.
3. Under **Select Device Info**, pick a connected device, or choose **Manual Input** and type its MAC and IP addresses.
4. Click **OK**.

**Kilobat can help.** Kilobat’s [new-device alerts](https://kilobat.app/docs/home-network#new-devices) tell you when a device you haven’t seen joins your home Wi-Fi. **Tools › Devices** lists what answers on the network, and you can name each one.

## UPnP and port forwarding

Zyxel states UPnP certification, and a separate **UPnP NAT-T** switch lets apps open ports automatically. The guide doesn’t name IGD or its traffic counters, and doesn’t mention NAT-PMP or a separate “share status” switch. NAT must be on for the connection under **Network Setting › Broadband**.

1. Open **Network Setting › Home Networking › UPnP**.
2. Under **UPnP State**, select **Enable**.
3. Under **UPnP NAT-T State**, select **Enable** so apps can create port mappings.
4. Click **Apply**. Active mappings appear in the table on this screen.

Zyxel warns that UPnP apps opening firewall ports can be a security issue, and that UPnP devices can talk to each other freely; turn it off if you don’t want that. TCP port 7547 is reserved for system use. Most models also support Port Control Protocol, at **Network Setting › NAT › PCP**.

### Forward a port by hand

1. Open **Network Setting › NAT**, which starts on **Port Forwarding**.
2. Click **Add New Rule** and turn on **Active**.
3. Enter a **Service Name** and choose the **WAN Interface**.
4. Enter the same port numbers in **Start Port**, **End Port** and both **Translation** fields.
5. Enter the **Server IP Address**, choose the protocol, then click **OK**.

**Kilobat can help.** On supported routers, Kilobat’s [call reports](https://kilobat.app/video-calls) can read available traffic counters, read-only, to identify another device that was busy when a call froze. Correlation does not prove the cause. With Kilobat Pro, [Connect your router](https://kilobat.app/docs/home-network#router) reads those counters in one click, with no password, for the whole home’s traffic. Kilobat never opens ports.

## Prioritise calls and gaming

These routers prioritise outgoing traffic with queues and rules. A smaller queue number means higher priority.

1. Open **Network Setting › QoS › General** and switch **QoS** on.
2. Enter your upload speed in kbps under **WAN Managed Upstream Bandwidth**. If blank, the router uses 95% of the line speed.
3. Set **Upstream Traffic Priority Assigned by** to **None**, so your own rules apply, then click **Apply**.
4. In **Queue Setup**, add a queue and give it a priority from 1 to 8.
5. In **Classification Setup**, click **Add New Classification**. Match a device by its **MAC** and pick the queue.

**Kilobat can help.** Run Kilobat’s [stutter test](https://kilobat.app/guides/recipes/test-call-stutter) before and after you change priorities, to see whether calls really got smoother.

## 2.4 and 5 GHz, and the channel

Most models run 2.4 GHz and 5 GHz; the EX7710-B0 adds 6 GHz. With mesh on, one name is forced across the bands and the router steers devices between them.

1. Open **Network Setting › Wireless › General**.
2. To name the bands separately, clear **Keep the same settings** for the bands.
3. Choose the **Band**, then set its network name and security.
4. Click **Apply**. If you’re on Wi-Fi, you’ll need to reconnect.

### Change the channel

1. In **Network Setting › Wireless › General**, choose the **Band**.
2. Pick a **Channel**, or **Auto** to let the router choose.
3. Choose a **Bandwidth**. Zyxel suggests **20MHz** to reduce interference with neighbours.
4. Click **Apply**.

### Scan for busy channels

1. Open **Network Setting › Wireless › Channel Status** and pick a band.
2. Click **Scan**. Blue bars count access points per channel; the orange bar marks the router’s own.

**Kilobat can help.** Kilobat shows which band and channel your Mac is on, and `kilobat channels` suggests the least crowded channel. More in [crowded Wi-Fi channels](https://kilobat.app/guides/wifi-channel-congestion) and [Wi-Fi on a Mac](https://kilobat.app/wifi-analyzer-mac).

## Mesh: which node a device uses

Most models support MPro Mesh, Zyxel’s version of Wi-Fi Alliance EasyMesh. The router acts as controller and steers devices to a less busy extender or band.

1. Open **Network Setting › Wireless › MESH**.
2. Click the **MPro Mesh** switch to turn it on.
3. Add extenders with the MPro Mesh or Zyxel One app; which app depends on your model.
4. Check the result in the **Topology** view under **Connection Status › Connectivity**.

Turning mesh on copies the main 2.4 GHz Wi-Fi name and password to the main 5 GHz network.

**Kilobat can help.** When your Mac moves to another node or band, Kilobat’s Health says so, so a weaker node isn’t taken for a router problem. Kilobat Pro’s roam history shows how long the Mac stayed on each node and how weak the signal got before it moved. See [find a better Wi-Fi spot](https://kilobat.app/guides/recipes/find-better-wifi-spot).

## Guest network

1. On **Connection Status**, find **Guest WiFi Settings** and switch on the bands you want.
2. Click the arrow icon to set the guest name and password, then save.

### Choose what guests can reach

1. Open **Network Setting › Wireless › Guest/More AP** and click the **Edit** icon next to a network.
2. Select **Guest WLAN**.
3. Set **Access Scenario** to **External Guest** for internet only, or **Home Guest** to include wired home devices.
4. Click **OK**. A yellow bulb under **Status** means the network is on.

**Kilobat can help.** Kilobat can show a network as a QR code, so guests join with their phone’s camera: [share Wi-Fi with a QR code](https://kilobat.app/guides/recipes/share-wifi-qr-code).

## DNS settings

By default the router acts as a DNS proxy for your devices.

1. Open **Network Setting › Home Networking › LAN Setup**.
2. Under **DNS Values**, select **Static** and enter the DNS server’s address.
3. Click **Apply**.

### Change the DNS the router itself uses

1. Open **Network Setting › Broadband** and click the **Edit** icon for your connection.
2. Under **DNS Server**, select **Use Following Static DNS Address**.
3. Enter the **Primary DNS Server** and **Secondary DNS Server**, then click **Apply**.

**Kilobat can help.** Before you change DNS, [compare resolvers with Kilobat](https://kilobat.app/guides/recipes/pick-faster-dns) to see which answers fastest from your home.

## Connection status and logs

1. On **Connection Status › System Info**, click the arrow icon for uptime, firmware, WAN address and DNS servers.
2. **System Monitor › Traffic Status** shows bytes sent and received on the WAN port.
3. **System Monitor › Log › System Log** lists events. Filter by **Level** and **Category**, or click **Export Log**.
4. **Maintenance › Diagnostic** runs ping, traceroute and DNS lookup tests from the router.

**Kilobat can help.** When the line keeps dropping, Kilobat’s [provider report](https://kilobat.app/docs/health#report) lists outages, latency and speed tests against your plan, ready to send to your provider.

## Manuals and downloads

- [AX/DX/EX/PX Series User’s Guide, firmware 5.17–5.70, Edition 22 (PDF)](https://spdl.zyxel.com/AX7501-B1/user_guide/AX7501-B1_Users_guide_5.17-5.70%20Ed22.pdf)
- [EX3301-T0 and Opal Wi-Fi 6 Series User’s Guide, Edition 20 (PDF)](https://download.zyxel.com/EX3301-T0/user_guide/EX3301-T0_AX-DX-EX-PX%20Opal%20WiFi6%20Series%20UG_V5.17-5.70_Ed20.pdf)
- [Zyxel Support Campus: access your router via the Web GUI](https://mysupport.zyxel.com/hc/en-us/articles/360019745839-Zyxel-Router-how-access-your-router-via-Web-GUI)
- [Firmware downloads](https://www.zyxel.com/service-provider)

Links go to the maker’s own pages.

## Questions

**What is the default Zyxel router password?**

Current models have a random password on the device label, with the user name `admin`. Zyxel says a router with no password on the label uses `admin` and `1234`.

**I can’t reach 192.168.1.1. What should I check?**

Make sure you’re on the router’s own network, and only that network. Zyxel suggests checking that your computer’s address is in the same range, and setting one such as `192.168.1.100` by hand if it isn’t.

## Mac problems on this network

Fixes for what Mac users most often hit on home routers and mesh systems.

- [Mac drops Wi-Fi or sticks to a far node on mesh Wi-Fi](https://kilobat.app/guides/mac-mesh-wifi-roaming): On a mesh network, your Mac drops when it moves between nodes, or stays on a distant one. See how Macs roam and which router settings to change.
- [Mac Wi-Fi keeps disconnecting](https://kilobat.app/guides/mac-wifi-keeps-disconnecting): Your Mac drops Wi-Fi again and again, not only after sleep. Record when the drops happen, then check the router, roaming, interference and network software.
- [Mac won't connect to a WPA3 or Wi-Fi 7 router](https://kilobat.app/guides/mac-wpa3-wifi7-router-wont-connect): Your Mac can't join, or keeps dropping, after the router moved to WPA3 or Wi-Fi 7. Check the security mode, PMF and MLO, and the saved network.
- [Mac can't see or join a 6 GHz Wi-Fi network](https://kilobat.app/guides/mac-cant-see-6ghz-wifi): Your Mac never uses 6 GHz, or can't find the 6 GHz network. Check Mac support, Wi-Fi 6E mode, WPA3 and the router's 6 GHz settings.
- [AirPlay or AirPrint stopped working after a new router or mesh](https://kilobat.app/guides/airplay-airprint-mesh-router): Your Mac no longer finds the Apple TV, speaker or printer after a router or mesh change. Check the router settings that stop Bonjour discovery, brand by brand.
- [Wi-Fi printer shows Offline on a Mac](https://kilobat.app/guides/printer-offline-mac): The printer is on and connected to Wi-Fi, but the Mac says Offline or Printer not connected. Find the cause and re-add the printer so that it stays online.
- [Double NAT: a mesh system behind your provider’s router](https://kilobat.app/guides/double-nat-mesh): A mesh system behind your provider's router can create double NAT. See what it breaks, how to spot it from a Mac, and when to use bridge or passthrough mode.
- [iCloud Private Relay and your router’s security or parental controls](https://kilobat.app/guides/private-relay-router-security): Private Relay stops working at home, or your router's security and parental controls stop covering the Mac. See which router features conflict and what to change.

## Sources

- [Zyxel: AX/DX/EX/PX Series User’s Guide, firmware 5.17–5.70, Edition 22, May 2025 (PDF)](https://spdl.zyxel.com/AX7501-B1/user_guide/AX7501-B1_Users_guide_5.17-5.70%20Ed22.pdf)
- [Zyxel: EX3301-T0 AX/DX/EX/PX Opal Wi-Fi 6 Series User’s Guide, Edition 20, March 2025 (PDF)](https://download.zyxel.com/EX3301-T0/user_guide/EX3301-T0_AX-DX-EX-PX%20Opal%20WiFi6%20Series%20UG_V5.17-5.70_Ed20.pdf)
- [Zyxel Support Campus: Zyxel Router, how to access your router via Web GUI](https://mysupport.zyxel.com/hc/en-us/articles/360019745839-Zyxel-Router-how-access-your-router-via-Web-GUI)

Checked on 10 November 2026.

## See what your router can’t tell you

Kilobat is a Mac menu-bar app that watches the network from your side: which app is using it, whether the Wi-Fi, the router or the provider is slow, and why a call froze.

[Download for Mac ↓](https://kilobat.app/downloads/Kilobat-1.44.2.dmg?via=site)

```
brew install seifip/kilobat/kilobat
```

## More router guides

- [AmpliFi](https://kilobat.app/routers/amplifi): AmpliFi is Ubiquiti’s consumer mesh Wi-Fi line, with a touchscreen router and MeshPoints.
- [Apple AirPort](https://kilobat.app/routers/apple-airport): AirPort Extreme, AirPort Time Capsule and AirPort Express are Apple’s Wi-Fi base stations.
- [ASUS router](https://kilobat.app/routers/asus): ASUS RT, ROG Rapture, TUF Gaming and ZenWiFi routers all run ASUSWRT.
- [Cudy Wi-Fi router](https://kilobat.app/routers/cudy): Cudy’s Wi-Fi routers and mesh systems, such as the WR3000 and M3000, share one web interface at cudy.net.
