---
title: "Jazztel router login, restart, UPnP and guest Wi-Fi: a practical guide"
url: "https://kilobat.app/routers/jazztel-router"
description: "Sign in to a Jazztel Livebox or ZTE router at 192.168.1.1, schedule a restart, list devices, check UPnP, open ports, split the Wi-Fi bands and set guest Wi-Fi."
---

Provider box · Jazztel

# Jazztel router login, restart, UPnP and guest Wi-Fi

Jazztel supplies Livebox fibre routers, with older ZTE models still in many homes. You manage both in a browser at `192.168.1.1`. The menus are in Spanish on the Livebox and in English on the ZTE routers.

Sign in

`livebox` or `192.168.1.1`

Password

On a Livebox the user name is `admin`. Unless you changed it, the password is the **Clave Wi-Fi** (Wi-Fi key) on the sticker under the router, or on the back of a Livebox 6s.

Models

Livebox 6s, Livebox 6, Livebox 6+, Livebox Fibra, ZTE F680, ZTE F660, ZTE H298N, ZTE H218N

**Checked 10 November 2026.** Paths come from Jazztel’s own help pages. Livebox 6 and 6+ are the main reference; Livebox 6s and Livebox Fibra pages show the same menus. On the latest Livebox software some Wi-Fi options moved to **Configuración avanzada** (Advanced settings). ZTE steps apply to the F680, F660, H298N and H218N, and menus can vary with software version. Jazztel publishes no firmware version list.

## Sign in to the Jazztel router (Livebox and ZTE)

**Factory default.** ZTE routers only: `jazztel` / `jazztel` or `admin` / `admin`, depending on its age. Jazztel recommends changing it at first sign-in, under **Administration › User Management**.

1. Connect your Mac to the router with an Ethernet cable or over its Wi-Fi network.
2. Open `http://livebox` or `http://192.168.1.1` in your browser. On a Livebox Fibra you can also use `http://liveboxfibra`.
3. Type `admin` as the user and the Wi-Fi key from the sticker as the password.
4. Click **Acceso** (Sign in), shown as **Entrar** on some Livebox Fibra software.

Forgotten a password you set? Push a pointed object into the **Reset** hole at the back: 5 seconds on a Livebox 6 or 6s, 10 seconds on a Livebox Fibra with the router on. The sticker password works again, but every setting is erased. The fibre (ONT) password is a different key.

### Change the Livebox admin password

1. Open the **Configuración avanzada** (Advanced settings) tab.
2. Click **Administración** in the left-hand column.
3. Enter the **Contraseña actual** (Current password), then the new one twice.
4. Click **Guardar** (Save). The user name stays `admin`.

## Restart it properly

Jazztel’s advice for a stuck connection is to switch the Livebox off and on.

1. Press the **ON/OFF** button at the back to switch the Livebox off.
2. Press it again to switch the Livebox back on.
3. Wait up to 3 minutes for the Internet light to turn steady green.

Don’t use the Reset hole to restart: it erases your settings.

### Schedule a restart

Do this with the TV decoder switched off.

1. Sign in and open the **Información y diagnóstico** (Information and diagnostics) tab.
2. Click **Reinicio** (Restart).
3. Set automatic restart to **Sí** (Yes).
4. In **Reiniciar cada** (Restart every), enter the number of nights, such as `7`.
5. Click **Guardar** (Save). The restart happens between 3 and 4 AM.

**Kilobat can help.** Kilobat Pro’s [router check-up](https://kilobat.app/docs/home-network#router-checkup) learns how fast this router usually answers, says when a restart is due, and checks the next day whether it helped.

## Update the firmware

Jazztel documents no manual software update or version page for the Livebox. ZTE routers show the firmware version after you sign in, but Jazztel documents no update.

## See connected devices

1. Sign in and open the **Mi red local** (My local network) tab.
2. Click **Dispositivos conectados** (Connected devices) for a map of wired and Wi-Fi devices.
3. Click a device to rename it, change its icon or restrict its internet access.
4. Open **Dispositivos desconectados** (Disconnected devices) for those seen before but offline now.

### See Wi-Fi details or a list with addresses

1. Open **Wi-Fi › Equipos Wi-Fi** (Wi-Fi devices) to see band, RSSI and current speed.
2. For names, IP and MAC addresses, open **Configuración avanzada › Configuración de la red › DHCP** (Advanced settings › Network settings › DHCP).

### Give a device a fixed address

1. Open **Configuración avanzada › Configuración de la red › DHCP**.
2. Under **Dirección IP estática** (Static IP address), pick the device and enter the address.
3. Click **Añadir** (Add).

**Kilobat can help.** Kilobat’s [new-device alerts](https://kilobat.app/docs/home-network#new-devices) tell you when a device you haven’t seen joins your home Wi-Fi. **Tools › Devices** lists what answers on the network, and you can name each one.

## UPnP and port forwarding

Jazztel’s Livebox pages name a **UPnP IGD** switch, and say UPnP is on by default on the Livebox Fibra and ZTE routers. Apps that support it open their own ports.

1. Sign in and open the **Configuración avanzada** (Advanced settings) tab.
2. Click **Configuración de la red** (Network settings) on the left.
3. Open the **UPnP** tab in the middle of the page.
4. Check that **Habilitar UPnP IGD** (Enable UPnP IGD) is ticked.

With UPnP on, any app or device on your network can open ports without asking, and malware can too. Turn it off if nothing needs it. Jazztel documents no separate switch for sharing status over UPnP.

### UPnP on ZTE routers

1. Sign in and click **Application**, then **UPnP**.
2. Check that **Enable** is ticked.

### Open a port by hand on a Livebox

1. Open **Configuración avanzada › Configuración de la red › NAT/PAT**.
2. Under **Personalizar reglas** (Custom rules), pick the **Aplicación / servicio** (Application / service).
3. Fill in **Puerto interno** (Internal port) and **Puerto externo** (External port); write a range as `first-last`.
4. Choose the **Protocolo** (TCP, UDP or both) and the **Dispositivo** (Device).
5. Click **Añadir** (Add).

### Open a port by hand on a ZTE router

1. Open **Application › Application List** and click **Click here to add an application**.
2. Enter an **Application Name**, the **Protocol** and the port fields, then click **Add**.
3. Open **Port Forwarding (Application List)**.
4. Enter the device’s **LAN Host IP Address**, choose the rule under **AppName** and click **Add**.

### NAT-PMP

Jazztel documents no NAT-PMP setting.

**Kilobat can help.** On supported routers, Kilobat’s [call reports](https://kilobat.app/video-calls) can read available traffic counters, read-only, to identify another device that was busy when a call froze. Correlation does not prove the cause. With Kilobat Pro, [Connect your router](https://kilobat.app/docs/home-network#router) reads those counters in one click, with no password, for the whole home’s traffic. Kilobat never opens ports.

## Prioritise calls and gaming

Jazztel documents no QoS or device-priority setting. On a Livebox you can only block a device or limit its internet hours under **Mi red local › Dispositivos conectados**.

**Kilobat can help.** Run Kilobat’s [stutter test](https://kilobat.app/guides/recipes/test-call-stutter) before and after you change priorities, to see whether calls really got smoother.

## 2.4 and 5 GHz, and the channel

**Wi-Fi Inteligente** (Smart Wi-Fi) gives you one network name for 2.4 GHz and 5 GHz; the router picks the band and channel. A secondary network uses a single band.

1. Sign in and open **Wi-Fi › Wi-Fi principal** (Main Wi-Fi).
2. On the latest software, open **Configuración avanzada › Configuración del Wi-Fi** instead and confirm with **OK**.
3. Click **Ver** (Show) to open the secondary networks.
4. Turn on the 2.4 GHz or 5 GHz network, and give it a name and password.
5. Click **Guardar** (Save).

Repeaters don’t relay secondary networks, so connect them to the main Wi-Fi Inteligente network.

### Pair a 2.4 GHz-only gadget

1. On a Livebox 6, hold the **WPS** button for 5 seconds; the Wi-Fi light flashes white and green.
2. Within 15 minutes, pair the gadget using the network name and key on the left of the label.

### Change the channel

Jazztel documents no manual channel setting on the Livebox; Wi-Fi Inteligente picks the channel. It says the ZTE menu can change channels but gives no path.

**Kilobat can help.** Kilobat shows which band and channel your Mac is on, and `kilobat channels` suggests the least crowded channel. More in [crowded Wi-Fi channels](https://kilobat.app/guides/wifi-channel-congestion) and [Wi-Fi on a Mac](https://kilobat.app/wifi-analyzer-mac).

## Mesh: which node a device uses

Jazztel’s Wi-Fi Premium repeater joins the Livebox in one Wi-Fi Inteligente network, so you don’t pick the router or repeater by hand.

1. Connect the repeater to the main Wi-Fi Inteligente network, not a secondary one.
2. Sign in and open **Wi-Fi › Equipos Wi-Fi** (Wi-Fi devices).
3. Check the group listing devices connected through a repeater.
4. Read the **Banda** (Band) column; `Rep-5G` or `Rep-2.4G` means the device uses a repeater.

**Kilobat can help.** When your Mac moves to another node or band, Kilobat’s Health says so, so a weaker node isn’t taken for a router problem. Kilobat Pro’s roam history shows how long the Mac stayed on each node and how weak the signal got before it moved. See [find a better Wi-Fi spot](https://kilobat.app/guides/recipes/find-better-wifi-spot).

## Guest network

1. Sign in and open **Wi-Fi › Wi-Fi de invitados** (Guest Wi-Fi).
2. Use the **Activar/desactivar** (On/off) button to turn the guest network on.
3. Set the **Nombre (SSID)** (Network name) and the **Clave Wi-Fi** (Wi-Fi key).
4. Set the **Temporizador** (Timer) to turn the network off after a few hours.
5. Click **Guardar** (Save).

Guests get internet access but can’t reach your other devices. Jazztel’s repeaters don’t relay guest Wi-Fi.

**Kilobat can help.** Kilobat can show a network as a QR code, so guests join with their phone’s camera: [share Wi-Fi with a QR code](https://kilobat.app/guides/recipes/share-wifi-qr-code).

## DNS settings

Jazztel documents no setting for the DNS servers the router uses or hands out. Set DNS on the Mac instead.

**Kilobat can help.** Before you change DNS, [compare resolvers with Kilobat](https://kilobat.app/guides/recipes/pick-faster-dns) to see which answers fastest from your home.

## Connection status and logs

Jazztel documents the router’s lights rather than a line or event log page.

1. Look at the Internet light on the Livebox. Steady green means you’re online.
2. Flashing green means it is still connecting. Wait 3 minutes, then switch the Livebox off and on.
3. Steady white means the fibre password (ONT password) is missing or wrong.
4. Flashing white means the fibre isn’t connected, so check the fibre cable.

**Kilobat can help.** When the line keeps dropping, Kilobat’s [provider report](https://kilobat.app/docs/health#report) lists outages, latency and speed tests against your plan, ready to send to your provider.

## Manuals and downloads

- [Ayuda Jazztel: Manuales y especificaciones (all routers)](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones)
- [Ayuda Jazztel: Manuales Livebox 6](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/livebox-6)
- [Ayuda Jazztel: Manuales Livebox Fibra](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/livebox-fibra)
- [Ayuda Jazztel: Manuales ZTE F660](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/zte-f660)

Links go to the maker’s own pages.

## Questions

**Which password opens the Jazztel router settings?**

On a Livebox, the user is `admin` and the password is the Wi-Fi key on the sticker, unless you changed it. ZTE routers use `jazztel` / `jazztel` or `admin` / `admin`, depending on their age.

## Mac problems on this network

Fixes for what Mac users most often hit on home routers and mesh systems.

- [Mac drops Wi-Fi or sticks to a far node on mesh Wi-Fi](https://kilobat.app/guides/mac-mesh-wifi-roaming): On a mesh network, your Mac drops when it moves between nodes, or stays on a distant one. See how Macs roam and which router settings to change.
- [Mac Wi-Fi keeps disconnecting](https://kilobat.app/guides/mac-wifi-keeps-disconnecting): Your Mac drops Wi-Fi again and again, not only after sleep. Record when the drops happen, then check the router, roaming, interference and network software.
- [Mac won't connect to a WPA3 or Wi-Fi 7 router](https://kilobat.app/guides/mac-wpa3-wifi7-router-wont-connect): Your Mac can't join, or keeps dropping, after the router moved to WPA3 or Wi-Fi 7. Check the security mode, PMF and MLO, and the saved network.
- [Mac can't see or join a 6 GHz Wi-Fi network](https://kilobat.app/guides/mac-cant-see-6ghz-wifi): Your Mac never uses 6 GHz, or can't find the 6 GHz network. Check Mac support, Wi-Fi 6E mode, WPA3 and the router's 6 GHz settings.
- [AirPlay or AirPrint stopped working after a new router or mesh](https://kilobat.app/guides/airplay-airprint-mesh-router): Your Mac no longer finds the Apple TV, speaker or printer after a router or mesh change. Check the router settings that stop Bonjour discovery, brand by brand.
- [Wi-Fi printer shows Offline on a Mac](https://kilobat.app/guides/printer-offline-mac): The printer is on and connected to Wi-Fi, but the Mac says Offline or Printer not connected. Find the cause and re-add the printer so that it stays online.
- [Double NAT: a mesh system behind your provider’s router](https://kilobat.app/guides/double-nat-mesh): A mesh system behind your provider's router can create double NAT. See what it breaks, how to spot it from a Mac, and when to use bridge or passthrough mode.
- [iCloud Private Relay and your router’s security or parental controls](https://kilobat.app/guides/private-relay-router-security): Private Relay stops working at home, or your router's security and parental controls stop covering the Mac. See which router features conflict and what to change.

## Sources

- [Ayuda Jazztel: Accede a la configuración de tu router Livebox 6](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/livebox-6/2963-accede-a-la-configuracion-de-tu-router-livebox-6)
- [Ayuda Jazztel: Acceso a la configuración de tu router Livebox 6s](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/livebox-6s/7156-acceso-a-la-configuracion-de-tu-router-livebox-6s)
- [Ayuda Jazztel: Accede a la configuración de tu router Livebox Fibra](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/livebox-fibra/2163-accede-a-la-configuracion-de-tu-router-livebox-fibra)
- [Ayuda Jazztel: Accede a la configuración de tu router ZTE de Jazztel](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/zte-f660/1966-accede-a-la-configuracion-de-tu-router-zte-de-jazztel)
- [Ayuda Jazztel: Cambia la clave de administración de tu router Livebox 6 o Livebox 6+](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/livebox-6/2965-cambia-la-clave-de-administracion-de-tu-router-livebox-6-o-livebox-6plus)
- [Ayuda Jazztel: Configura el reinicio automático de tu router](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/2694-configura-el-reinicio-automatico-de-tu-router)
- [Ayuda Jazztel: Saca el máximo partido a tu router Livebox de Jazztel](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/livebox-6/2770-saca-el-maximo-partido-a-tu-router-livebox-de-jazztel)
- [Ayuda Jazztel: Todo lo que debes saber sobre tu router Livebox 6](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/livebox-6/2962-todo-lo-que-debes-saber-sobre-tu-router-livebox-6)
- [Ayuda Jazztel: Resolución de problemas comunes del router Livebox 6](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/livebox-6/2964-resolucion-de-problemas-comunes-del-router-livebox-6)
- [Ayuda Jazztel: Reset de fábrica de tu router Livebox 6 o Livebox 6+](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/livebox-6/2975-reset-de-fabrica-de-tu-router-livebox-6-o-livebox-6plus)
- [Ayuda Jazztel: Visualiza dispositivos conectados a un router Livebox 6/6+](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/livebox-6/2970-visualiza-dispositivos-conectados-a-un-router-livebox-6-6plus-y-programa-restricciones-de-acceso-a-internet)
- [Ayuda Jazztel: Puedes ver los dispositivos conectados a tu Livebox Fibra](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/livebox-fibra/2204-puedes-ver-los-dispositivos-conectados-a-tu-livebox-fibra-y-bloquearlos)
- [Ayuda Jazztel: Características de las conexiones Wi-Fi Livebox 6s](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/livebox-6s/7167-caracteristicas-de-las-conexiones-wi-fi-livebox-6s)
- [Ayuda Jazztel: Asigna una dirección IP estática a un dispositivo (Livebox 6 o 6+)](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/livebox-6/2973-asigna-una-direccion-ip-estatica-a-un-dispositivo-conectado-a-tu-router-livebox-6-o-livebox-6plus)
- [Ayuda Jazztel: Abre los puertos de tu router Livebox 6 o Livebox 6+](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/livebox-6/2974-abre-los-puertos-de-tu-router-livebox-6-o-livebox-6plus)
- [Ayuda Jazztel: Abre los puertos de tu router Livebox Fibra](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/livebox-fibra/2590-abre-los-puertos-de-tu-router-livebox-fibra)
- [Ayuda Jazztel: Apertura de puertos de tu router ZTE de Jazztel](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/zte-f660/1977-apertura-de-puertos-de-tu-router-zte-de-jazztel)
- [Ayuda Jazztel: Activa un SSID secundario en el router Livebox 6 o Livebox 6+](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/livebox-6/2967-activa-un-ssid-secundario-en-el-router-livebox-6-o-livebox-6plus)
- [Ayuda Jazztel: Cómo conectar un dispositivo compatible solo con banda 2,4 GHz](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/livebox-6/7437-como-conectar-un-dispositivo-compatible-solo-con-banda-2-4-ghz)
- [Ayuda Jazztel: Todo lo que debes saber sobre el Wi-Fi Inteligente de Jazztel](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/livebox-6/2862-todo-lo-que-debes-saber-sobre-el-wi-fi-inteligente-de-jazztel)
- [Ayuda Jazztel: Wi-Fi inteligente en tu router Livebox Fibra](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/livebox-fibra/2468-wi-fi-inteligente-en-tu-router-livebox-fibra)
- [Ayuda Jazztel: Activa el Wi-Fi de invitados en tu router Livebox 6 o Livebox 6+](https://ayuda.jazztel.com/dispositivos-y-routers/manuales-y-especificaciones/livebox-6/2968-activa-el-wi-fi-de-invitados-en-tu-router-livebox-6-o-livebox-6plus)

Checked on 10 November 2026.

## See what your router can’t tell you

Kilobat is a Mac menu-bar app that watches the network from your side: which app is using it, whether the Wi-Fi, the router or the provider is slow, and why a call froze.

[Download for Mac ↓](https://kilobat.app/downloads/Kilobat-1.44.2.dmg?via=site)

```
brew install seifip/kilobat/kilobat
```

## More router guides

- [Livebox (Orange Spain)](https://kilobat.app/routers/orange-spain-livebox): The Livebox is the fibre router Orange supplies in Spain, with the fibre ONT built in on the Livebox 7 and 6s.
- [Router Smart WiFi](https://kilobat.app/routers/movistar-router): The Router Smart WiFi is the fibre router Movistar supplies in Spain; the current model is the Router Movistar WiFi 7.
- [DIGI router](https://kilobat.app/routers/digi-router): DIGI supplies ZTE routers with its fibre in Spain, most recently the Wi-Fi 7 ZTE ZXHN F6705.
