---
title: "Proton VPN: how it picks ports on a Mac, what Smart Protocol does, and what breaks if you block it · Kilobat"
url: "https://kilobat.app/processes/proton-vpn"
description: "Proton VPN tries other protocols and ports when a network blocks one, and lists no ports. What Smart Protocol and alternative routing do, and what breaks if blocked."
---

# What is Proton VPN?

Proton VPN sends your traffic through an encrypted tunnel to a Proton server. Proton says that each protocol uses its own port, and it does not publish a port list.

**Fix this with your agent**Copies a prompt for Claude Code, Codex or any agent that can use Terminal.

I want to know what Proton VPN is doing on my Mac and whether its network use is normal. Read https://kilobat.app/processes/proton-vpn.md and work through it with me. Install the Kilobat CLI if it’s missing: brew install seifip/kilobat/kilobat. Run the guide’s Terminal and kilobat checks yourself and tell me what you find. List the steps only I can do. Ask before you change any setting.

Process: `Proton VPN` · Also seen as: `ProtonVPN`, `ProtonVPN WireGuard`, `Smart Protocol` · Made by Proton · Applies to: The Proton VPN app on macOS 14 Sonoma and later. Checked on 8 November 2026 against Proton's support pages and blog. · Checked: 8 November 2026

## Short answer

Proton's VPN app. It tunnels your traffic over a protocol that Smart Protocol picks, and falls back to other protocols and ports when a network blocks one.

Block with care

Blocking Proton's ports stops the tunnel from connecting, and Proton does not publish a port list. Block them only where you do not use Proton VPN.

Path

`/Applications/ProtonVPN.app`

## What it is

Proton's blog article on Smart Protocol says that VPNs use protocols to send packets through ports on Proton's servers. It says that each protocol uses a different port and can also use backup ports.

The article says that a network owner can close those ports to restrict you to a connection that they can monitor. Proton does not list the port numbers on that page.

Smart Protocol is on by default. If the first protocol is blocked, the app tries the next one. Proton names the manual choices as IKEv2, OpenVPN UDP, OpenVPN TCP, WireGuard, WireGuard TCP and Stealth.

Proton says that some ports are hard to block, because they carry a large share of all internet traffic.

Proton's Mac article lists a setting for **alternative routing** under the Advanced tab. Proton describes it as a way to bypass firewalls or network problems.

The same article says that the first launch shows a System Extension Blocked notice. You turn on **ProtonVPN WireGuard** under `System Settings › General › Login Items & Extensions › Network Extensions`.

The article says that you install the app by dragging it to the Applications folder. It names the app **Proton VPN** in the DMG step and **ProtonVPN** in the launch step.

## Why it uses the network

- **The VPN tunnel.** The app sends your traffic to a Proton server over the protocol that Smart Protocol or you choose.
- **Fallback on blocked networks.** Proton says that Smart Protocol tries other protocols when the default one is blocked. Alternative routing is a separate setting for the same kind of problem.
- **Port forwarding.** Proton says that port forwarding opens a random port on a P2P server and passes incoming data to your Mac through the tunnel. On macOS, Proton calls it an early-access feature.
- **Network extension.** Proton's Mac article names a WireGuard network extension that you allow in System Settings.

## How much is normal

Proton does not publish figures for idle traffic. While connected, the traffic that you route through the tunnel moves through the VPN server.

Proton says that the VPN Accelerator is on by default. It describes no real advantage to turning it off.

Proton says that DNS leak protection is always on in the Mac app.

## When it uses a lot, and why

- **Everything you do online.** The tunnel carries your browsing, downloads and calls.
- **Port forwarding.** Proton says that the forwarded port usually changes when you reconnect. It says that opening a port carries a small risk.
- **Repeated protocol tries.** On a network that blocks several protocols, Smart Protocol tries them in turn. Proton does not give timings.

## Is it safe to block?

Block with care

Blocking Proton's ports stops the tunnel from connecting, and Proton does not publish a port list. Block them only where you do not use Proton VPN.

What breaks if you block it

- The tunnel fails when the protocol and backup ports are all blocked.
- A firewall rule that blocks the WireGuard network extension stops new connections.

Blocking means a firewall rule that refuses its connections. Don’t quit or disable a macOS process to save data: macOS starts it again, and other features depend on it.

## Reduce its use

1. Leave Smart Protocol on. Proton enables it by default and says that it handles blocked protocols.
2. If a network blocks the app, turn on alternative routing in the Advanced tab of Settings.
3. If macOS blocks the extension, open `System Settings › General › Login Items & Extensions › Network Extensions` and turn on **ProtonVPN WireGuard**.
4. Turn on **Allow LAN connections** in the Connection tab if you need to reach a local printer while connected.

## See how much it uses

1. Open Activity Monitor and search for Proton. Open the Network tab to see the bytes that the app and its helpers moved.

## With Kilobat

1. In the Kilobat app list, search for `Proton`.
2. Ask the same question in Terminal.

   ```
   kilobat explain ProtonVPN
   ```

The live view and the explanations are free. History in the app needs Kilobat Pro. Blocking needs Pro and the network filter: see the [network filter](https://kilobat.app/docs/blocking#filtering), [Protection](https://kilobat.app/docs/blocking#protection) and the [hotspot data saver](https://kilobat.app/save-hotspot-data).

## What isn’t documented

Proton's pages that this entry uses do not list port numbers, bundle IDs or process names for the Mac app.

Proton says that backup ports exist. It does not say how many there are.

Proton does not publish figures for idle traffic or tunnel overhead.

## Questions

**Which ports does Proton VPN use?**

Proton does not list them on the pages that this entry uses. It says that each protocol uses a different port and can use backup ports.

**What is Smart Protocol?**

It is a setting that is on by default. If the first protocol is blocked, the app tries the next one. You can turn it off and pick a protocol yourself.

**Does Proton VPN support port forwarding on a Mac?**

Proton calls it an early-access feature on macOS. You must be connected to a P2P server for it to work.

## Sources

- [Proton VPN blog: Smart Protocol feature helps defeat censorship](https://protonvpn.com/blog/smart-protocol)
- [Proton VPN Support: How to use Proton VPN on macOS](https://protonvpn.com/support/protonvpn-mac-vpn-application)
- [Proton VPN Support: Port forwarding](https://protonvpn.com/support/port-forwarding)

Checked on 8 November 2026.

## Related

- [NordVPN](https://kilobat.app/processes/nordvpn): NordVPN's VPN client. Nord lists the outbound ports for each protocol, such as UDP 51820 for NordLynx and TCP 443 or UDP 1194 for OpenVPN.
- [Tailscale](https://kilobat.app/processes/tailscale): Tailscale's VPN client. It talks to Tailscale's coordination servers over HTTPS, relays over TCP 443, and sends WireGuard traffic to your other devices over UDP.
- [Proton VPN on Mac: check the VPN and fix connection problems](https://kilobat.app/guides/proton-vpn-mac)
