---
title: "ExpressVPN: which ports it needs on a Mac, which protocols it uses, and what breaks if you block it · Kilobat"
url: "https://kilobat.app/processes/expressvpn"
description: "ExpressVPN tunnels traffic with Lightway, WireGuard, OpenVPN or IKEv2. The firewall ports its support article lists, how the protocols differ, and what breaks."
---

# What is ExpressVPN?

ExpressVPN sends your traffic through an encrypted tunnel to an ExpressVPN server. Its support pages name the protocols, the helper tool and the firewall ports.

**Fix this with your agent**Copies a prompt for Claude Code, Codex or any agent that can use Terminal.

I want to know what ExpressVPN is doing on my Mac and whether its network use is normal. Read https://kilobat.app/processes/expressvpn.md and work through it with me. Install the Kilobat CLI if it’s missing: brew install seifip/kilobat/kilobat. Run the guide’s Terminal and kilobat checks yourself and tell me what you find. List the steps only I can do. Ask before you change any setting.

Process: `ExpressVPN` · Also seen as: `ExpressVPN Split Tunnel`, `ExpressVPN helper tool`, `Lightway` · Made by ExpressVPN · Applies to: The ExpressVPN app on macOS 14 Sonoma and later. Checked on 8 November 2026 against ExpressVPN's support pages. · Checked: 8 November 2026

## Short answer

ExpressVPN's Mac app. It tunnels your traffic with Lightway, WireGuard, OpenVPN or IKEv2, and installs a helper tool and a split tunnel network extension.

Block with care

Blocking ExpressVPN's ports stops the tunnel from connecting. Block them only on a network where you do not use ExpressVPN.

Path

`/Applications/ExpressVPN.app`

## What it is

ExpressVPN's protocol page says that the app uses several protocols. They are Lightway, WireGuard, OpenVPN and IKEv2.

It calls Lightway ExpressVPN's own protocol. It says that Lightway supports both TCP and UDP, so it can work better on networks where UDP is blocked or unreliable.

ExpressVPN's support article on a connection error lists the ports that a firewall must allow for outgoing connections. They are `tcp443`, `udp1194`, `udp1198`, `udp10088` to `udp10098`, `udp10188` to `udp10198`, and `tcp10288` to `tcp10298`.

That article sits under OpenVPN troubleshooting. It does not say which protocol uses which port.

The Mac setup article says that the installer asks for your password to install a helper tool.

It also says that split tunnelling needs a system extension. macOS then shows a prompt about a network extension called ExpressVPN Split Tunnel. You allow it in `System Settings › General › Login Items & Extensions`.

The setup article names the default protocol setting **Automatic**. It says that Automatic picks the protocol that suits your network.

## Why it uses the network

- **The VPN tunnel.** The app sends your traffic to an ExpressVPN server over the protocol that you or Automatic choose.
- **Fallback on blocked networks.** ExpressVPN says that the other protocols are alternatives for networks where Lightway cannot connect. Lightway over TCP can use an HTTPS proxy that you set by hand.
- **Split tunnelling.** ExpressVPN's Mac article says that split tunnelling uses a network extension and a proxy configuration that you allow in macOS.
- **Connection on startup.** The Mac article describes settings that start ExpressVPN at login and connect to the last server on launch. It also describes auto-connect rules.

## How much is normal

ExpressVPN does not publish figures for idle traffic. While connected, all traffic that you route through the tunnel moves through the VPN server.

ExpressVPN recommends the Automatic protocol setting. It says that you should switch protocol mainly when its support team advises it.

## When it uses a lot, and why

- **Everything you do online.** The tunnel carries your browsing, downloads and calls. Large downloads show up as traffic to the VPN server.
- **A weak protocol match.** ExpressVPN says that a different protocol may give faster speeds in some cases. It names Support Team advice as the usual reason to switch.
- **Reconnects.** ExpressVPN says that Lightway goes idle and reconnects when a device switches networks or wakes from sleep.

## Is it safe to block?

Block with care

Blocking ExpressVPN's ports stops the tunnel from connecting. Block them only on a network where you do not use ExpressVPN.

What breaks if you block it

- The tunnel fails to connect when the ports above are blocked.
- Lightway over UDP fails on a network that blocks UDP. Lightway over TCP is the alternative.
- A firewall rule that blocks the helper or the extension can stop split tunnelling.
- An old OpenVPN configuration file fails with a deprecated option error. ExpressVPN says to download a fresh one.

Blocking means a firewall rule that refuses its connections. Don’t quit or disable a macOS process to save data: macOS starts it again, and other features depend on it.

## Reduce its use

1. Leave the protocol on **Automatic**. ExpressVPN recommends it.
2. If you switch protocol, disconnect from ExpressVPN first. ExpressVPN says that you must.
3. On a network that blocks the tunnel, ask the administrator to allow outgoing connections on the ports in ExpressVPN's list.
4. If split tunnelling is off, allow the extension in `System Settings › General › Login Items & Extensions`.

## See how much it uses

1. Open Activity Monitor and search for ExpressVPN. Open the Network tab to see the bytes that the app and its helper moved.

## With Kilobat

1. In the Kilobat app list, search for `ExpressVPN`.
2. Ask the same question in Terminal.

   ```
   kilobat explain ExpressVPN
   ```

The live view and the explanations are free. History in the app needs Kilobat Pro. Blocking needs Pro and the network filter: see the [network filter](https://kilobat.app/docs/blocking#filtering), [Protection](https://kilobat.app/docs/blocking#protection) and the [hotspot data saver](https://kilobat.app/save-hotspot-data).

## What isn’t documented

ExpressVPN's pages do not give the bundle ID, the install path or the process names for the Mac app.

The firewall port list does not say which protocol uses which port. It sits in an article about an OpenVPN error.

ExpressVPN does not publish figures for idle traffic or tunnel overhead on these pages.

## Questions

**Which ports does ExpressVPN use?**

ExpressVPN's support article lists `tcp443`, `udp1194`, `udp1198` and three higher ranges. It does not say which protocol uses which port.

**Does ExpressVPN use TCP or UDP?**

Both. ExpressVPN says that Lightway and OpenVPN each work over TCP and UDP. It says that WireGuard supports only UDP.

**Why does ExpressVPN ask to install a helper tool?**

ExpressVPN's Mac setup article says that the installer asks for your password so that it can install a helper tool. It does not describe what the tool does.

## Sources

- [ExpressVPN Support: Connection error, Deprecated option](https://expressvpn.com/support/troubleshooting/connection-error-deprecated-option)
- [ExpressVPN: VPN protocols](https://www.expressvpn.com/product-features/vpn-protocols)
- [ExpressVPN Support: Set up ExpressVPN on Mac](https://www.expressvpn.com/support/vpn-setup/app-for-mac-os/)

Checked on 8 November 2026.

## Related

- [NordVPN](https://kilobat.app/processes/nordvpn): NordVPN's VPN client. Nord lists the outbound ports for each protocol, such as UDP 51820 for NordLynx and TCP 443 or UDP 1194 for OpenVPN.
- [Tailscale](https://kilobat.app/processes/tailscale): Tailscale's VPN client. It talks to Tailscale's coordination servers over HTTPS, relays over TCP 443, and sends WireGuard traffic to your other devices over UDP.
- [ExpressVPN on Mac: check the VPN and fix connection problems](https://kilobat.app/guides/expressvpn-mac)
