---
title: "Legacy Access Point and 802.11b provides suboptimal performance on Mac · Kilobat Guides"
url: "https://kilobat.app/guides/wifi-legacy-access-point"
description: "System Settings flags a Wi-Fi network as a Legacy Access Point. Learn what 802.11b legacy rates cost and how to fix the router."
---

# “Legacy Access Point” and “802.11b provides suboptimal performance” on Mac

The label means that the router offers the old 802.11b rates. Those rates are slow, and a legacy mode can slow the whole network.

**Fix this with your agent**Copies a prompt for Claude Code, Codex or any agent that can use Terminal.

My Mac has this problem: “Legacy Access Point” and “802.11b provides suboptimal performance” on Mac. Read https://kilobat.app/guides/wifi-legacy-access-point.md and work through it with me. Install the Kilobat CLI if it’s missing: brew install seifip/kilobat/kilobat. Run the guide’s Terminal and kilobat checks yourself and tell me what you find. List the steps only I can do. Ask before you change any setting.

Applies to: macOS 14 Sonoma and later. The text was checked in WiFiSettingsKit on macOS 27.2. · Checked: 29 October 2026

## Symptoms

- System Settings › Wi-Fi shows “Legacy Access Point” and “802.11b provides suboptimal performance.”
- A note suggests that you upgrade to an 802.11n/ac router.
- Wi-Fi is slower than the internet plan.

## Likely causes

- **An old router.** The router can run only old standards.
- **A legacy radio mode on a new router.** A setting for 802.11b compatibility is on, to support very old devices.
- **A router in 2.4 GHz only mode.** Wi-Fi on 2.4 GHz is more likely to show legacy rates.

## How to check

1. Open System Settings › Wi-Fi, click Details and look at the PHY mode and the rates.
2. Show the current Wi-Fi link in Terminal. Look at the PHY Mode and the Transmit Rate.

   ```
   system_profiler SPAirPortDataType
   ```
3. Open the router page and look at the radio mode.

## How to fix it

1. Open the router page. Set the radio mode to the setting that enables all modes, or to Wi-Fi 2 through Wi-Fi 6 or later. Apple lists this as the recommended setting.
2. Turn on every band that the router supports, such as 5 GHz and 6 GHz.
3. Update the router firmware. If the router is very old, replace it with an 802.11n/ac or newer router.
4. Join a faster band. See [2.4 GHz, 5 GHz and 6 GHz Wi-Fi on a Mac](https://kilobat.app/guides/wifi-bands-2-4-5-6-ghz).

## With Kilobat

1. Show the link rate, the band and the signal of the Wi-Fi now.

   ```
   kilobat wifi status
   ```
2. The CLI is free. In the app, the advice from these checks is part of Kilobat Pro. See [Find why one site or API won't connect](https://kilobat.app/guides/recipes/why-cant-it-connect).

## Questions

**Does 802.11b mean that all devices use slow rates?**

Not always, but an access point that offers legacy rates can lower the speed for other devices on the same channel.

**Should I turn off every old mode?**

Apple's guidance is to enable the modes the router offers so that each device can use its fastest mode. Remove only a legacy mode that no device needs.

**Can the Mac fix this?**

No. Change the router.

## Sources

- Error text in WiFiSettingsKit.framework, macOS 27.2 (Localizable.loctable)
- [Apple Support: Recommended settings for Wi-Fi routers and access points](https://support.apple.com/kb/HT202068)
- system_profiler(8), man page installed with macOS 27.2

Checked on 29 October 2026.

## Related guides

- [2.4 GHz, 5 GHz and 6 GHz Wi-Fi on a Mac](https://kilobat.app/guides/wifi-bands-2-4-5-6-ghz): Wi-Fi uses three bands.
- [Wi-Fi is slow on the Mac but fast on the phone](https://kilobat.app/guides/slow-wifi-mac-fast-phone): When the phone is fast on the same network, the internet connection is not the problem.
- [Wi-Fi slow but Ethernet fast? Find the wireless bottleneck](https://kilobat.app/guides/wifi-slow-ethernet-fast): If the same device is consistently faster on Ethernet, investigate the wireless path first.
- [Crowded Wi-Fi channels near your Mac](https://kilobat.app/guides/wifi-channel-congestion): Networks on the same channel share the air time.
- [Weak Wi-Fi signal on a Mac](https://kilobat.app/guides/weak-wifi-signal-mac): Signal strength and noise decide how fast and how stable the Wi-Fi link is.
