---
title: "The L2TP-VPN server did not respond on Mac · Kilobat Guides"
url: "https://kilobat.app/guides/l2tp-vpn-server-did-not-respond"
description: "An L2TP VPN fails with The L2TP-VPN server did not respond. Check the server, the secret, the network and NAT."
---

# “The L2TP-VPN server did not respond” on Mac

The Mac started an L2TP over IPSec connection, and the server did not reply. The message says to verify your settings and contact your administrator.

**Fix this with your agent**Copies a prompt for Claude Code, Codex or any agent that can use Terminal.

My Mac has this problem: “The L2TP-VPN server did not respond” on Mac. Read https://kilobat.app/guides/l2tp-vpn-server-did-not-respond.md and work through it with me. Install the Kilobat CLI if it’s missing: brew install seifip/kilobat/kilobat. Run the guide’s Terminal and kilobat checks yourself and tell me what you find. List the steps only I can do. Ask before you change any setting.

Applies to: macOS 13 Ventura and later. The text was checked in PPPController on macOS 27.2. · Checked: 29 October 2026

## Symptoms

- The VPN screen shows “The L2TP-VPN server did not respond. Try reconnecting.”
- The message adds: if the problem continues, verify your settings and contact your Administrator.
- The same VPN works on another network.

## Likely causes

- **Wrong settings.** The server address, the account name, the password or the shared secret is wrong.
- **A network that blocks L2TP over IPSec.** A hotel, school or router firewall can drop the traffic.
- **NAT problems.** Many routers in a chain can break IPSec.
- **The server is down.** The server or its firewall does not answer.

## How to check

1. Check the server address in System Settings › VPN. Look for typing errors and extra spaces.
2. Test that the server answers. Look up its name.

   ```
   dscacheutil -q host -a name vpn.example.com
   ```
3. List the VPN services and their state.

   ```
   scutil --nc list
   ```
4. Try another network, such as a phone hotspot. If it works, the first network blocks the VPN.

## How to fix it

1. Check each setting with your VPN provider: the server address, the account name and the authentication.
2. Try another network. If it works, the first network blocks L2TP.
3. Turn on verbose logging, try again and read the log. Use the Options button of the VPN service.
4. Ask the provider for another protocol, such as IKEv2, if the network blocks L2TP.

## With Kilobat

1. Test the server name and the path to it before you try the VPN again.

   ```
   kilobat why vpn.example.com
   ```
2. The CLI is free. In the app, the advice from these checks is part of Kilobat Pro. See [Find why one site or API won't connect](https://kilobat.app/guides/recipes/why-cant-it-connect).

## Questions

**Where is verbose logging?**

In System Settings › VPN, open the info button of the service, then Options. Apple lists Use verbose logging there.

**Is L2TP still supported?**

Apple documents the options for L2TP over IPSec VPN services on Mac. See the source list.

## Sources

- Error text in PPPController.bundle (SystemConfiguration), macOS 27.2 (Localizable.loctable)
- [Apple Support: Set up a VPN connection on Mac](https://support.apple.com/guide/mac-help/set-up-a-vpn-connection-on-mac-mchlp2963/mac)
- [Apple Support: Change options for L2TP over IPSec VPN connections on Mac](https://support.apple.com/guide/mac-help/change-options-for-l2tp-over-ipsec-vpn-connections-mh119412/mac)
- scutil(8), man page installed with macOS 27.2

Checked on 29 October 2026.

## Related guides

- [“The VPN server did not respond” on Mac](https://kilobat.app/guides/vpn-server-did-not-respond): The Mac sent its request, and nothing came back.
- [“The L2TP-VPN server was unreachable” on Mac](https://kilobat.app/guides/l2tp-vpn-server-was-unreachable): The Mac could not reach the server at the address that you gave.
- [VPN connected but no internet on a Mac](https://kilobat.app/guides/vpn-connected-no-internet): A VPN sends traffic through a tunnel.
- [Double NAT: a mesh system behind your provider’s router](https://kilobat.app/guides/double-nat-mesh): When a mesh system runs as a router behind your provider’s router, both devices translate addresses.
