---
title: "Cable unplugged for Ethernet on Mac · Kilobat Guides"
url: "https://kilobat.app/guides/ethernet-cable-unplugged"
description: "System Settings shows Ethernet as Cable unplugged. Check the cable, the adapter and the port at the other end."
---

# “Cable unplugged” for Ethernet on Mac

macOS shows this when the Ethernet link is down. Either the cable is not plugged in, or the device at the other end does not answer.

**Fix this with your agent**Copies a prompt for Claude Code, Codex or any agent that can use Terminal.

My Mac has this problem: “Cable unplugged” for Ethernet on Mac. Read https://kilobat.app/guides/ethernet-cable-unplugged.md and work through it with me. Install the Kilobat CLI if it’s missing: brew install seifip/kilobat/kilobat. Run the guide’s Terminal and kilobat checks yourself and tell me what you find. List the steps only I can do. Ask before you change any setting.

Applies to: All current macOS versions. The text was checked in Network settings on macOS 27.2. · Checked: 10 November 2026

## Symptoms

- System Settings › Network shows Ethernet with the status “Cable unplugged”.
- The message says that either the cable is not plugged in or the device at the other end is not responding.
- A USB or Thunderbolt adapter shows a similar message.

## Likely causes

- **A loose or damaged cable.** The link needs both ends and every wire pair.
- **The switch or router port is off or has failed.** The device at the other end does not answer.
- **A faulty adapter or dock.** The adapter can lose power or its driver.
- **The wrong service.** The cable can sit in another port than the service that you look at.

## How to check

1. List the hardware ports. Look for the Ethernet port or adapter.

   ```
   networksetup -listallhardwareports
   ```
2. Show the link state for the port. Look for `status: active` or `inactive`. Use the device name from the list.

   ```
   ifconfig en5
   ```
3. Look at the lights on the router or switch port. No light means no link.
4. Try another cable and another port on the switch.

## How to fix it

1. Press both ends of the cable in until they click.
2. Try another cable, then another port on the router or switch.
3. Try another adapter, dock or USB-C port. See [Mac does not detect a USB or Thunderbolt Ethernet adapter](https://kilobat.app/guides/ethernet-adapter-not-detected).
4. Restart the router or switch if no device gets a link.
5. Restart the Mac. Then check System Settings › Network again.

## With Kilobat

1. Show each Ethernet port. A port with nothing linked reads No cable.

   ```
   kilobat wired
   ```
2. After the link comes back, check the whole path.

   ```
   kilobat diagnose
   ```
3. The CLI is free. In the app, the advice from these checks is part of Kilobat Pro. See [Find why one site or API won't connect](https://kilobat.app/guides/recipes/why-cant-it-connect).

## Questions

**What if the cable is fine on another computer?**

Then the Mac, the adapter or its port is the cause. Test another adapter.

**Why does a good cable show unplugged?**

The message also covers a device that does not answer, such as a switch port that is off.

**What changes when the cable connects but no IP address arrives?**

That is a different message. See [“The cable for Ethernet is connected, but your computer does not have an IP address”](https://kilobat.app/guides/ethernet-connected-no-ip-address).

## Sources

- Error text in Network.appex (System Settings), macOS 27.2 (Localizable.loctable)
- networksetup(8) and ifconfig(8), man page installed with macOS 27.2

Checked on 10 November 2026.

## Related guides

- [Mac does not detect a USB or Thunderbolt Ethernet adapter](https://kilobat.app/guides/ethernet-adapter-not-detected): A USB or Thunderbolt Ethernet adapter must appear as a hardware port and as a network service.
- [USB-C dock or Ethernet adapter keeps disconnecting on Mac](https://kilobat.app/guides/ethernet-keeps-disconnecting-mac): A dock or a USB Ethernet adapter adds a hub, a chip and a power path between the Mac and the cable.
- [Ethernet on a Mac is slower than expected](https://kilobat.app/guides/ethernet-slow-link-speed): An Ethernet link runs at the speed that both ends and the cable support.
- [Wi-Fi drops when a USB-C hub, USB 3 drive or monitor is plugged in](https://kilobat.app/guides/usb-c-hub-wifi-interference): USB 3 data makes radio noise in the 2.4 GHz band.
